Rev |
Log message |
Author |
Age |
Path |
26 |
Modified to be able to handle different load from virtual addresses. This
enables the bootloader capability. |
dgisselq |
2908d 10h |
/ |
25 |
Converted timer B to be a non-reloadable watchdog timer. |
dgisselq |
2908d 10h |
/ |
24 |
Made the ziptimer autoreload feature a parameter (dis)abled option. |
dgisselq |
2908d 11h |
/ |
23 |
Fixed a bug which caused every instruction to be loaded/prefetched twice. |
dgisselq |
2908d 11h |
/ |
22 |
Initial version of the ZipOS operating system construct(s). |
dgisselq |
2912d 09h |
/ |
21 |
Adds two device drivers: one for the SPI display, and another for the pseudo
device that simulates the Real-Time Clock. |
dgisselq |
2912d 10h |
/ |
20 |
This linker description file acknowledges a .fixdata section which can be
used for debug data upon startup. This allows a startup function to write
all registers out, without destroying them or modifying them on the way. |
dgisselq |
2912d 10h |
/ |
19 |
Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block. |
dgisselq |
2912d 10h |
/ |
18 |
Added a picture of the device pinouts to the specification. |
dgisselq |
2912d 10h |
/ |
17 |
Modifications necessary to find some bugs, and to load the flash with an ELF
file. |
dgisselq |
2912d 10h |
/ |
16 |
Bug fix. This release fixes several bugs associated with transitioning from
user mode to supervisor mode while running from flash memory. This also
rewires TIMER-B into a watch-dog timer, and adjusts the LED's to be an
indicator of interrupts and whether or not the CPU has stalled or not as well. |
dgisselq |
2912d 10h |
/ |
15 |
Adds a new program and a new device: doorbell2 and the PmodCLS display. This
also includes a real-time clock simulator--since we couldn't fit it on the
board. |
dgisselq |
2918d 03h |
/ |
14 |
Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.) |
dgisselq |
2918d 03h |
/ |
13 |
Fixed a nasty parameter problem between toplevel and txuart. The UART
transmitter now both works (again), and properly generates the required
interrupts. This also finishes the fixes to the alternate toplevel file,
alttop.v, that should've been fixed in the last release. |
dgisselq |
2918d 03h |
/ |
12 |
The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs. |
dgisselq |
2919d 01h |
/ |
11 |
Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work. |
dgisselq |
2919d 23h |
/ |
10 |
Added the capability to run ELF files natively, fully processing the ELF format. |
dgisselq |
2919d 23h |
/ |
9 |
Added pinout diagrams, based upon a (hopefully) final UCF file. |
dgisselq |
2919d 23h |
/ |
8 |
First pseudo-running version. The alternate configuration (not the main one)
has been initially tested. wbregs works for reading/writing registers,
so it is now possible to test the peripherals. |
dgisselq |
2925d 00h |
/ |
7 |
Created/added an initial specification. Updated/corrected several copywrite
notices. |
dgisselq |
2925d 14h |
/ |