Rev |
Log message |
Author |
Age |
Path |
118 |
Lots of changes. The biggest are to the CPU: MPYxHI instructions are now
verified to be working, ILLegal instructions stop at the right location,
the STEP bit no longer self-clears, etc. Other changes cleaned up the
internal documentation and removed parameters that should only have local
scope from the global parameter list. The NEW_INSTRUCTION_SET was also
removed from the CPU, since ... it's been new for too long to really be new
anymore. |
dgisselq |
2746d 10h |
/xulalx25soc/trunk/bench/ |
117 |
Updates, to include new README and bench/cpp/Makefile that doesnt depend upon
a static VERILATOR_ROOT location. |
dgisselq |
2771d 01h |
/xulalx25soc/trunk/bench/ |
116 |
Fixes a compiler warning about signed versus unsigned comparison, by forcing
the comparison to be signed. |
dgisselq |
2855d 12h |
/xulalx25soc/trunk/bench/ |
115 |
Made the SDCard support dependent upon a XULA25 macro, which is defined at the
top of the file. Remove the XULA25 macro definition, and this will build
assuming a XULA9 configuration. |
dgisselq |
2864d 03h |
/xulalx25soc/trunk/bench/ |
113 |
Lots of updates, mostly focused on getting the XuLA board and CPU able to pass
a comprehensive test suite. At this point, everything passes and logic usage
is down even. Among the few changes includes the "break" bit in the uCC
register, used to indicate a switch to supervisor mode occurred as a result
of a user break, and the ability for the supervisor to clear the instruction
cache. |
dgisselq |
2864d 03h |
/xulalx25soc/trunk/bench/ |
112 |
Provides a simulated UART capability to the busmaster_tb simulation. |
dgisselq |
2866d 08h |
/xulalx25soc/trunk/bench/ |
107 |
Minor change. |
dgisselq |
2872d 21h |
/xulalx25soc/trunk/bench/ |
106 |
Minor, inconsequential changes. |
dgisselq |
2872d 21h |
/xulalx25soc/trunk/bench/ |
96 |
Now accepts an SD-Card backing file, so that SD-Card reads *and* writes can be
tested. |
dgisselq |
2896d 01h |
/xulalx25soc/trunk/bench/ |
95 |
Added write capability to the SD-SPI simulator. |
dgisselq |
2896d 01h |
/xulalx25soc/trunk/bench/ |
94 |
Fixes a bug which had caused the device to die artificially and early, just
simply because the program connecting to the simulator shut its pipe down before
getting our last message. We now ignore this signal and continue. |
dgisselq |
2896d 01h |
/xulalx25soc/trunk/bench/ |
75 |
Added simulation capability for the SD-Card, as well as debugging output for the
DMA. (The SD-Card debug may not be fully featured, yet, but it has gotten me
to where I can talk to the card.) |
dgisselq |
2901d 22h |
/xulalx25soc/trunk/bench/ |
47 |
Fixes the "NAN" clocks/second output, as well as making input timing come closer
to a realistic timing. (I actually don't know what timing the JTAG port is
providing, but ... the new timer is closer.) |
dgisselq |
2980d 02h |
/xulalx25soc/trunk/bench/ |
37 |
These fixes were necessary to get the SDRAM into a working simulation
capability. It is finally what it was supposed to be: cycle accurate. Sadly,
to do this, I did need to make a subtle change to rtl/wbsdram.v. (I was having
a problem with external input clocking in Verilator. This fixes it--but its
a Verilator only change--to rtl/wbsdram.v that is.) |
dgisselq |
2988d 02h |
/xulalx25soc/trunk/bench/ |
36 |
A linker script, appropriate to the XuLA25-LX25 SoC. |
dgisselq |
2988d 03h |
/xulalx25soc/trunk/bench/ |
35 |
Updates the memory testing program to work successfully with the Gnu build
tools--particularly the GNU C-preprocessor from GCC and the GNU assembler from
Binutils. |
dgisselq |
2988d 03h |
/xulalx25soc/trunk/bench/ |
31 |
A bug fix, although one that rearranges the bus. The first four I/O locations
have been adjusted. The new locations are reflected in wishbone.html. In
addition, the PWM and UART devices no longer create bus errors when accessed.
Finally, this version uses a `define XULA25 to determine whether or not to build
for the XuLA2-LX9 or the XuLA2-LX25. If defined, it will build for the
XuLA2-LX25. If not, for the XuLA2-LX9. The ideal location for this define
would be to place it into your Xilinx configuration, should you wish to build
for the LX25. |
dgisselq |
2992d 00h |
/xulalx25soc/trunk/bench/ |
16 |
Updates to allow a test of the ICAP configuration interface. |
dgisselq |
3058d 01h |
/xulalx25soc/trunk/bench/ |
15 |
WORKING VERSION! ... or, at least the memory test works. |
dgisselq |
3059d 21h |
/xulalx25soc/trunk/bench/ |
10 |
Changed the name of the memtest.s file. |
dgisselq |
3059d 23h |
/xulalx25soc/trunk/bench/ |