OpenCores
URL https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk

Subversion Repositories xulalx25soc

[/] - Rev 63

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
63 Simplified logic. dgisselq 2902d 04h /
62 Removed the pipe logic from the non-pipelined version, and made the NOOP a
specific ALU instruction so that the PC is always properly updated.		 dgisselq 2902d 05h /
61 Fixed the timing control wires: busy and valid will never both be true. Busy
will be true (now) until valid is asserted, and busy will never not be
asserted until valid is true.		 dgisselq 2902d 05h /
60 LONG_MPY upgrade. This is part of swapping out the LDIHI instruction for a
MPY, and the MPYS and MPYU instructions for MPYSHI and MPYUHI respectively.		 dgisselq 2902d 05h /
59 Simplified logic. dgisselq 2902d 05h /
58 Bug fix: the UART can now be reconfigured post-boot without a BREAK condition. dgisselq 2902d 05h /
57 Fixed the TX/RX addresses so that they match the documentation: TX first, then
RX.		 dgisselq 2910d 04h /
56 Brings code in line with the OpenCores core: parameterizes the reload value,
and the number of bits in the timer.		 dgisselq 2910d 04h /
55 Updated copyright notice. dgisselq 2910d 04h /
54 Updated copyright notice. dgisselq 2910d 04h /
53 Added a touch of error checking. dgisselq 2950d 05h /
52 This brings the XuLA2-LX25 SoC up to speed with the rest of the ZipCPU, and
prepares it for the 32x32 bit multiply instruction set change.		 dgisselq 2950d 05h /
51 Lots of bug fixes. The ugliest were in the prefetch cache, where instructions
from one cache line were being issued as valid in another. Other fixes include
pipeline fixes so that LOD (Rx),Rx; LOD(Rx),Rx works, and more. Finally, the
decode was adjusted so that brev no longer affects the flags.		 dgisselq 2960d 03h /
50 Updates to fix some broken early branching code, both in idecode and pfcache. dgisselq 2969d 06h /
49 Added some documentation to make the read and write calls easier to understand. dgisselq 2978d 06h /
48 Cleaned up the documentation a touch. It no longer reads like the bugs I used
to debug are still being debugged ...		 dgisselq 2980d 08h /
47 Fixes the "NAN" clocks/second output, as well as making input timing come closer
to a realistic timing. (I actually don't know what timing the JTAG port is
providing, but ... the new timer is closer.)		 dgisselq 2980d 08h /
46 This is a bug fix release--fixing the bug that kept dumpsdram.cpp/wbsdram.v
from working when long pipelined reads were interrupted by the necessity of
a pair of refresh cycles.		 dgisselq 2980d 08h /
45 Minor cosmetic change, eliminates a warning in Xilinx's XISE but offers no
functional difference.		 dgisselq 2984d 04h /
44 NELM parameter adjusted to reflect the maximum number of lines the compressed
scope can handle: 31, not 32.		 dgisselq 2984d 04h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.