OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] - Rev 109

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
109 This file is now marked as obsolete. dgisselq 2382d 16h /zipcpu/
108 Just to clarify expectations ... this makefile hardly builds anything. dgisselq 2392d 18h /zipcpu/
107 Adding a missing file. dgisselq 2393d 09h /zipcpu/
106 Updated to allow building without the sources for the graphics used in the
document.
dgisselq 2393d 12h /zipcpu/
105 Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC.
dgisselq 2398d 16h /zipcpu/
104 An updated build script, actually builds zip-gcc. dgisselq 2399d 16h /zipcpu/
103 A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete.
dgisselq 2399d 21h /zipcpu/
102 Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.)
dgisselq 2402d 05h /zipcpu/
101 Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler.
dgisselq 2404d 08h /zipcpu/
100 Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.)
dgisselq 2404d 08h /zipcpu/
99 Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file.
dgisselq 2404d 08h /zipcpu/
98 Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality.
dgisselq 2404d 08h /zipcpu/
97 Added longjump instructions. dgisselq 2404d 08h /zipcpu/
96 Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses.
dgisselq 2404d 08h /zipcpu/
95 Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value.
dgisselq 2406d 14h /zipcpu/
94 These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.

The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/.
dgisselq 2431d 11h /zipcpu/
93 A BINUTILS BACKEND IS NOW AVAILABLE!!!! dgisselq 2439d 09h /zipcpu/
92 Adjustments made to match the simplified early branching. dgisselq 2439d 09h /zipcpu/
91 Minor updates. dgisselq 2439d 09h /zipcpu/
90 Removed MOV x(PC),PC from the list of possible early branching instructions.
ADD X,PC and LDI X,PC are now the only recognized early branching instructions.
This was done to spare logic, although I don't think I spared more than a
LUT or two.
dgisselq 2439d 09h /zipcpu/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.