OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] - Rev 180

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
180 Cleaned up the stall logic--made it independent of whether or not we are
designed to be alternating or not.
dgisselq 2751d 00h /zipcpu/
179 Lots of changes, most (all?) of them to the non-pipelined core. The resulting
core is now about 100-120 LUTs smaller when not-pipelined, and yet maintains
the pipelined logic when necessary.
dgisselq 2751d 00h /zipcpu/
178 Rewrote the parameter controlled logic to be just that: perameter controller,
rather than depending upon generics. The result reduces our area by a couple
LUTs.
dgisselq 2751d 00h /zipcpu/
177 Fixed the illegal address logic to be more precise. dgisselq 2751d 00h /zipcpu/
176 Switched from distributed to block RAM, and adjusted the logic to help
timing closure. The resulting core will build in designs up to 200MHz in
speed.
dgisselq 2751d 00h /zipcpu/
175 Fixed the carry bit for logical shifts: it is the last bit shifted out of the
register. 0x80000000>>32 yields a 0 with carry set. Anything logically
shifted by a number greater than thirty two clears carry and register.
dgisselq 2751d 00h /zipcpu/
174 Simplified the divide to improve timing performance. dgisselq 2751d 00h /zipcpu/
173 Adjusted the pdfinfo field, to accommodate Google's bot. dgisselq 2751d 00h /zipcpu/
172 Added a test to see if the compiler properly handles a large number of
arguments. Further, the sibcall enabled compiler now correcly makes a
sibcall from the end of txreg().
dgisselq 2751d 00h /zipcpu/
171 This fixes the problem whereby the ZipCPU didn't properly access more than
5 word-sized function parameters.
dgisselq 2753d 05h /zipcpu/
170 Minor updates to the orconf.pdf pre-conference slide. (Added the 'to be
revealed' line.
dgisselq 2762d 23h /zipcpu/
169 Added details of LM32 to the (pre) ORConf survey slide in trunk/doc. dgisselq 2799d 00h /zipcpu/
168 An updated version of the intensive CPU test. This one runs from C, and
requires a UART port and a PIC, but can run quite successfully on multiple
SoCs that have been built with the ZipCPU internal to them.
dgisselq 2812d 00h /zipcpu/
167 Updated the spec to reflect changes in the CC register: the user break
flag, and the ability to command a clearing of the instruction cache.
dgisselq 2812d 00h /zipcpu/
166 Bugfix version. This fixes a problem whereby function addresses with offsets
were not properly calculated, together with properly setting up pcrelative
offsets when using the move function together with a label.
dgisselq 2812d 04h /zipcpu/
165 Added a test to make certain that the arithmetic right shift was properly
propagating the high order bit. (The test works under verilator, but didn't
initially work in Xilinx -- thus a difference between the two.)
dgisselq 2812d 04h /zipcpu/
164 Updated with inputs from Hellwig Geisse regarding the details of the ECO32
CPU.
dgisselq 2820d 05h /zipcpu/
163 Trimmed OR1K instruction set down from 219 instructions, to the minimum number
of 48. Thanks to Olof for helping identify the minimal set!
dgisselq 2828d 07h /zipcpu/
162 Noted 64-bit integers are by extension, as are vector instructions. dgisselq 2828d 08h /zipcpu/
161 Initial version of the ORConf slides, showing only the initial CPU survey. dgisselq 2828d 08h /zipcpu/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.