Rev |
Log message |
Author |
Age |
Path |
190 |
Added the copyright statement back in. |
dgisselq |
2941d 23h |
/zipcpu/ |
189 |
Final, as delivered, ORCONF slides. |
dgisselq |
2941d 23h |
/zipcpu/ |
188 |
Adjusted the opcodes to match the binutils port: added RTN instructions, and
allowed BREAK instructions to include an immediate--to be interpreted by the
debugger. |
dgisselq |
2974d 02h |
/zipcpu/ |
187 |
Updated to match changed register definitions within the core. |
dgisselq |
2974d 02h |
/zipcpu/ |
186 |
Now allows profile dumping for ELF executables. |
dgisselq |
2974d 02h |
/zipcpu/ |
185 |
Now includes the proper flags for building with ELF executable file support. |
dgisselq |
2974d 02h |
/zipcpu/ |
184 |
Adjusted the illegal instruction option documentation. |
dgisselq |
2974d 02h |
/zipcpu/ |
183 |
Cleaned up the system so that !CYC implies !STB as well. |
dgisselq |
2974d 02h |
/zipcpu/ |
182 |
Bug fix for fast memories. This now works for memories with single cycle
latencies. |
dgisselq |
2974d 02h |
/zipcpu/ |
181 |
Adjusted the wishbone logic to include our wishbone simplification that if
CYC is ever low, STB must be low as well. |
dgisselq |
2974d 02h |
/zipcpu/ |
180 |
Cleaned up the stall logic--made it independent of whether or not we are
designed to be alternating or not. |
dgisselq |
2974d 02h |
/zipcpu/ |
179 |
Lots of changes, most (all?) of them to the non-pipelined core. The resulting
core is now about 100-120 LUTs smaller when not-pipelined, and yet maintains
the pipelined logic when necessary. |
dgisselq |
2974d 02h |
/zipcpu/ |
178 |
Rewrote the parameter controlled logic to be just that: perameter controller,
rather than depending upon generics. The result reduces our area by a couple
LUTs. |
dgisselq |
2974d 02h |
/zipcpu/ |
177 |
Fixed the illegal address logic to be more precise. |
dgisselq |
2974d 02h |
/zipcpu/ |
176 |
Switched from distributed to block RAM, and adjusted the logic to help
timing closure. The resulting core will build in designs up to 200MHz in
speed. |
dgisselq |
2974d 03h |
/zipcpu/ |
175 |
Fixed the carry bit for logical shifts: it is the last bit shifted out of the
register. 0x80000000>>32 yields a 0 with carry set. Anything logically
shifted by a number greater than thirty two clears carry and register. |
dgisselq |
2974d 03h |
/zipcpu/ |
174 |
Simplified the divide to improve timing performance. |
dgisselq |
2974d 03h |
/zipcpu/ |
173 |
Adjusted the pdfinfo field, to accommodate Google's bot. |
dgisselq |
2974d 03h |
/zipcpu/ |
172 |
Added a test to see if the compiler properly handles a large number of
arguments. Further, the sibcall enabled compiler now correcly makes a
sibcall from the end of txreg(). |
dgisselq |
2974d 03h |
/zipcpu/ |
171 |
This fixes the problem whereby the ZipCPU didn't properly access more than
5 word-sized function parameters. |
dgisselq |
2976d 08h |
/zipcpu/ |
170 |
Minor updates to the orconf.pdf pre-conference slide. (Added the 'to be
revealed' line. |
dgisselq |
2986d 02h |
/zipcpu/ |
169 |
Added details of LM32 to the (pre) ORConf survey slide in trunk/doc. |
dgisselq |
3022d 02h |
/zipcpu/ |
168 |
An updated version of the intensive CPU test. This one runs from C, and
requires a UART port and a PIC, but can run quite successfully on multiple
SoCs that have been built with the ZipCPU internal to them. |
dgisselq |
3035d 02h |
/zipcpu/ |
167 |
Updated the spec to reflect changes in the CC register: the user break
flag, and the ability to command a clearing of the instruction cache. |
dgisselq |
3035d 02h |
/zipcpu/ |
166 |
Bugfix version. This fixes a problem whereby function addresses with offsets
were not properly calculated, together with properly setting up pcrelative
offsets when using the move function together with a label. |
dgisselq |
3035d 06h |
/zipcpu/ |
165 |
Added a test to make certain that the arithmetic right shift was properly
propagating the high order bit. (The test works under verilator, but didn't
initially work in Xilinx -- thus a difference between the two.) |
dgisselq |
3035d 06h |
/zipcpu/ |
164 |
Updated with inputs from Hellwig Geisse regarding the details of the ECO32
CPU. |
dgisselq |
3043d 08h |
/zipcpu/ |
163 |
Trimmed OR1K instruction set down from 219 instructions, to the minimum number
of 48. Thanks to Olof for helping identify the minimal set! |
dgisselq |
3051d 10h |
/zipcpu/ |
162 |
Noted 64-bit integers are by extension, as are vector instructions. |
dgisselq |
3051d 11h |
/zipcpu/ |
161 |
Initial version of the ORConf slides, showing only the initial CPU survey. |
dgisselq |
3051d 11h |
/zipcpu/ |