| Rev |
Log message |
Author |
Age |
Path |
| 159 |
Now supports building a simulator that can load ELF files, such as GCC and/or
binutils will produce. |
dgisselq |
3098d 12h |
/zipcpu/trunk/bench/cpp/ |
| 155 |
Improved debug trace quality, for finding bugs after the fact. |
dgisselq |
3098d 12h |
/zipcpu/trunk/bench/cpp/ |
| 154 |
Added timing checks on the busy and valid signals: either one of the two is
valid, or the whole is idle. |
dgisselq |
3098d 12h |
/zipcpu/trunk/bench/cpp/ |
| 149 |
Updated the Makefile documentation and the all target. |
dgisselq |
3131d 10h |
/zipcpu/trunk/bench/cpp/ |
| 148 |
Minor changes to get LONG_MPY working, and adjust the documentation. |
dgisselq |
3131d 10h |
/zipcpu/trunk/bench/cpp/ |
| 147 |
Cleans up div_tb a bit, causing it to write SUCCESS out if successful and
abort if not. |
dgisselq |
3131d 10h |
/zipcpu/trunk/bench/cpp/ |
| 140 |
Minor changes, but fixes build of zippy_tb.cpp. |
dgisselq |
3135d 00h |
/zipcpu/trunk/bench/cpp/ |
| 134 |
Working updates, to keep this up to date with the RTL code. |
dgisselq |
3152d 12h |
/zipcpu/trunk/bench/cpp/ |
| 105 |
Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC. |
dgisselq |
3195d 21h |
/zipcpu/trunk/bench/cpp/ |
| 87 |
Adjusted the operator input line to reflect actual logic inputs, rather
than the registered inputs which may have been out of date. (Indeed, they
were out of date for the bug I was chasing and fixed ...) |
dgisselq |
3262d 12h |
/zipcpu/trunk/bench/cpp/ |
| 77 |
First check-in: the test bench for the divide instruction. |
dgisselq |
3267d 15h |
/zipcpu/trunk/bench/cpp/ |
| 76 |
The biggest change here was to zippy_tb, to make it more similar to the debugger
and to make it work with VLIW-type instructions. |
dgisselq |
3267d 16h |
/zipcpu/trunk/bench/cpp/ |
| 75 |
Modified for VLIW instructions. |
dgisselq |
3267d 16h |
/zipcpu/trunk/bench/cpp/ |
| 69 |
This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture. |
dgisselq |
3273d 20h |
/zipcpu/trunk/bench/cpp/ |
| 58 |
Added a rudimentary profiling support to the simulator. |
dgisselq |
3334d 21h |
/zipcpu/trunk/bench/cpp/ |
| 57 |
Some bug fixes to the dhrystone benchmark, and some compile time defines for
the test bench processor. Of the most important note is the fix to detect
lockups on the debug/wishbone bus--that has been a real help in getting the
ZipCPU installed and the debugger working on the various boards I'm working
with. (i.e., it's helped me find and figure out why/when things haven't worked)
Of other note is the new 'G' key in the testbench code, to cause the test
bench to run without user interaction until the next keystroke. This is
very valuable in long programs, as it makes getting to/from breakpoints
easier (i.e. you don't have to wait as long, hit 'G', breathe, hit 'space'
and you're there). |
dgisselq |
3344d 23h |
/zipcpu/trunk/bench/cpp/ |
| 43 |
Minor edits to the C++ testbench. |
dgisselq |
3354d 15h |
/zipcpu/trunk/bench/cpp/ |
| 39 |
Here's the documentation update to support the pipelined read/writes of
the bus from the CPU, as well as the test file that proved they worked. |
dgisselq |
3357d 18h |
/zipcpu/trunk/bench/cpp/ |
| 36 |
*Lots* of changes to increase processing speed and remove pipeline stalls.
Removed the useless flash cache, replacing it with a proper DMA controller.
"make test" in the main directory now runs a test program in Verilator and
reports on the results. |
dgisselq |
3366d 23h |
/zipcpu/trunk/bench/cpp/ |
| 34 |
Bunches of changes, although very little changed with the core itself.
Regarding the core, some bugs were fixed within zipcpu.v (the CPU part of the
core), so that the debugger can change the program counter. The debugger
can now halt the CPU and then view, examine, and modify registers to include
the program counter, although live changes to the CC register have not been
tested.
There was also a bug in the stall handling of the wishbone bus delay line. This
has now been fixed.
Moving outwards to the system, some parameters have been added to zipsystem
to make it more configurable for whatever environment you might wish to place
it within. Other minor clean ups have taken place, mostly to the internal
documentation.
Lots of changes, though, to the assembler. The big one is the implementation
of #define macros, C style. Several buggy macros were in sys.i. These have
been fixed. The Makefile has been adjusted so that the build of test.S, which
depends upon sys.i, is now properly dependent upon sys.i for make purposes.
Further, not only will zpp, the assembler preprocessor, handle #define macros,
it will also recursive #defines. The assembler expression evaluator has also
been updated to properly handle both operator precedence, as well as modulo
arithmetic.
The master system test file, test.S, found in the sw/zasm directory has been
updated to reflect these new capabilities. (I really need to move it to the
bench/asm directory, so you may expect that change sometime later.) |
dgisselq |
3392d 18h |
/zipcpu/trunk/bench/cpp/ |
