OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [rtl/] - Rev 138

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
66 Adjusted the support for the DEBUG_SCOPE within these so that it can be
compiled in, or not, based upon an external build configuration file: cpudefs.v.
That allows me to make that file project specific, while the rest of the CPU
is shared among all projects.
dgisselq 2442d 07h /zipcpu/trunk/rtl/
65 Lots of logic simplifications to the core, in addition to better support for
illegal instruction detection and bus error detection. The biggest change
had to deal with pushing the debug write interface into the ALU write
processing path. This simplifies the logic of adjusting the PC and CC
registers primarily, but also any writes to other registers. It also delays
these register writes by a clock, but since the debug interface is already
ridiculously slow I doubt that matters any.
dgisselq 2442d 07h /zipcpu/trunk/rtl/
64 Shuffled some comments into here from elsewhere. dgisselq 2442d 07h /zipcpu/trunk/rtl/
63 Simplified bus interactions, and added support for detecting illegal
instructions (i.e. bus errors) in the pipefetch routine.
dgisselq 2442d 07h /zipcpu/trunk/rtl/
62 Simplified the subtraction logic, so the carry bit no longer depends on
a separate 32-bit operation but becomes part of the subtract operation.
dgisselq 2442d 07h /zipcpu/trunk/rtl/
61 Simplified the bus delay logic. Depends upon the stall line being irrelevant
outside of a bus cycle.
dgisselq 2442d 07h /zipcpu/trunk/rtl/
56 Here's a bit of work in progress for getting the Zip CPU working on a XuLA2
board. Many changes include: the existence of a cpudefs.v file to control
what "options" are included in the ZipCPU build. This allows build control
to be separated from the project directory (one build for a XuLA2 board,
another for a Basys-3 development board). Other changes have made things
perhaps harder to read, but they get rid of warnings from XST.

A big change was the addition of the (* ram_style="distributed" *) comment
for the register set. This was necessary to keep XST from inferring a block
RAM and breaking the logic that was supposed to take place between a register
read and when it was used.
dgisselq 2452d 09h /zipcpu/trunk/rtl/
49 Final set of changes finishing the Dhrystone package. Dhrystone, as
implemented by hand in assembly, now works.
dgisselq 2462d 01h /zipcpu/trunk/rtl/
48 Files added/updated to get Dhrystone benchmark to work. Several fixes
to the CPU in the process, 'cause it wasn't working. Stall-less ALU
ops now work better, to include grabbing the memory result as it comes out
of the memory unit and placing it straight into either ALU or memory unit
for the next instruction.
dgisselq 2462d 01h /zipcpu/trunk/rtl/
38 A couple of quick updates:

- The Zip CPU now supports pipelined memory access at one clock per
instruction (assuming all the instructions are in the cache)
- There is now a 'zipbones' module to build a Zip System without peripherals.
Any peripherals would then need to be external to the CPU.
- Some bug fixes.

Documentation changes coming shortly.
dgisselq 2465d 06h /zipcpu/trunk/rtl/

< Prev 1 2

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.