Rev |
Log message |
Author |
Age |
Path |
112 |
Removed some debugging code from the compiler. |
dgisselq |
2965d 07h |
/zipcpu/trunk/sw/ |
111 |
Bug fix compiler update! This fixes a lot of the bugs associated with the
previous compiler release. |
dgisselq |
2965d 07h |
/zipcpu/trunk/sw/ |
110 |
The makefile no longer requires (or supports) building the obsolete machine
code test file optest. |
dgisselq |
2965d 08h |
/zipcpu/trunk/sw/ |
109 |
This file is now marked as obsolete. |
dgisselq |
2965d 08h |
/zipcpu/trunk/sw/ |
105 |
Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC. |
dgisselq |
2981d 08h |
/zipcpu/trunk/sw/ |
104 |
An updated build script, actually builds zip-gcc. |
dgisselq |
2982d 08h |
/zipcpu/trunk/sw/ |
103 |
A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete. |
dgisselq |
2982d 12h |
/zipcpu/trunk/sw/ |
102 |
Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.) |
dgisselq |
2984d 21h |
/zipcpu/trunk/sw/ |
101 |
Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler. |
dgisselq |
2987d 00h |
/zipcpu/trunk/sw/ |
100 |
Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.) |
dgisselq |
2987d 00h |
/zipcpu/trunk/sw/ |
99 |
Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file. |
dgisselq |
2987d 00h |
/zipcpu/trunk/sw/ |
98 |
Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality. |
dgisselq |
2987d 00h |
/zipcpu/trunk/sw/ |
97 |
Added longjump instructions. |
dgisselq |
2987d 00h |
/zipcpu/trunk/sw/ |
96 |
Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses. |
dgisselq |
2987d 00h |
/zipcpu/trunk/sw/ |
95 |
Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value. |
dgisselq |
2989d 06h |
/zipcpu/trunk/sw/ |
94 |
These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.
The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/. |
dgisselq |
3014d 03h |
/zipcpu/trunk/sw/ |
93 |
A BINUTILS BACKEND IS NOW AVAILABLE!!!! |
dgisselq |
3022d 01h |
/zipcpu/trunk/sw/ |
89 |
Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.
Further zopcodes.cpp contains several bug fixes. |
dgisselq |
3022d 01h |
/zipcpu/trunk/sw/ |
70 |
Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes. |
dgisselq |
3053d 03h |
/zipcpu/trunk/sw/ |
69 |
This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture. |
dgisselq |
3059d 07h |
/zipcpu/trunk/sw/ |
60 |
Fixed assembler processing of jump instructions, so that the new fast
return instruction can be used. The test file was modified to test
pipelined value passing within the CPU. That's where the value gets
(re)used before being stored back in the register file. As of this release,
all tests work. |
dgisselq |
3120d 07h |
/zipcpu/trunk/sw/ |
59 |
Adjusted these library routines to use the new stack frame and calling
conventions. |
dgisselq |
3120d 07h |
/zipcpu/trunk/sw/ |
55 |
A test was added to double check whether carry following right shifts worked.
This was a necessary part of getting two cycle linear feedback shift register
operations working for a memory test on a XuLA2 board. With this, I can now
verify that such feedback registers work for pseudorandom number purposes. |
dgisselq |
3130d 10h |
/zipcpu/trunk/sw/ |
54 |
This builds on the support for backslash character escapes in both single
and multicharacter expressions. Backslash character escapes are now
possible with quotations and backslashes, and the same code to interpret
the escapes is applied to both single and multicharacter sequences. |
dgisselq |
3130d 10h |
/zipcpu/trunk/sw/ |
53 |
Updated the #include/#define directives to work properly for nested includes.
(They were supposed to work properly for nested includes before ... and didn't)
This fixes those bugs. |
dgisselq |
3130d 10h |
/zipcpu/trunk/sw/ |
52 |
Added the capability to "see" character's encoded within a binary file,
by printing the character value(s) of each opcode (if they are printable)
on each line. |
dgisselq |
3130d 10h |
/zipcpu/trunk/sw/ |
51 |
Added the capability to look at binary files and 'see' characters as they
are encoded in memory. |
dgisselq |
3130d 10h |
/zipcpu/trunk/sw/ |
46 |
A series of updates associated with getting Dhrystone to work. Includes
updates to getting multiple files to link/work together within the assembler,
as well as getting quoted quotations to work in the lexer, and better
include file support in the preprocessor. |
dgisselq |
3140d 01h |
/zipcpu/trunk/sw/ |
45 |
Library routines for 32-bit multiply and divide, both signed and unsigned. |
dgisselq |
3140d 01h |
/zipcpu/trunk/sw/ |
44 |
?? |
dgisselq |
3140d 01h |
/zipcpu/trunk/sw/ |