Rev |
Log message |
Author |
Age |
Path |
122 |
This represents a major rewrite of the machine definition file, gcc/config/zip/
zip.md. In particular, the architecture has been changed from a "cc0"
architecture to one with a specific CC_REG and CCmode. Instructions in the
machine definition file must now explicitly set this register with their
results. The result is better condition code handling, better usage of the
conditional execution modes of certain instructions, and even some decent
optimizations. |
dgisselq |
2949d 14h |
/zipcpu/trunk/sw |
121 |
Fixed the bug whereby BGE instructions dissassembled as BGT instructions and
vice versa. Loads and stores of absolute addresses now show those addresses
in ($<>). The assembler also accepts integer offsets to symbols, although
it isn't clear that it does the "right" thing with them yet. |
dgisselq |
2949d 14h |
/zipcpu/trunk/sw |
120 |
Should've regression tested that last build. This one fixes what that last
fix broke: Registers with offsets (i.e. operand-B) now work (again). |
dgisselq |
2953d 10h |
/zipcpu/trunk/sw |
119 |
Fixed some limits bugs. Now LDI.Z 1 produces LDIHI.Z 0, LDOLO.Z 1 as desired
instead of the erroneous BREV.Z 0. Likewise, loading 0x80000000 no longer
produces a clear instruction, but actually loads the value of interest. |
dgisselq |
2953d 10h |
/zipcpu/trunk/sw |
117 |
Bug fixes: This adds the zip_ucc() instruction as a builtin, fixes the zip_cc()
builtin (both are now unspec_volatile) together with fixing the *_context(int*)
builtins so that they use five registers, never four. Further, this fixes the
negative stack space offset bug. Many of the GCC files now have Zip debugging
hooks within them as well, to simplify further debugging of the compiler. |
dgisselq |
2953d 21h |
/zipcpu/trunk/sw |
116 |
Updated binutils. This fixes problems with linking global variables, fixes
the map file report, adjusts the LJMP instruction disassembly to display the
resulting address, as well as in general fixing up link problems when
sizeof(byte) is 32-bits. |
dgisselq |
2953d 21h |
/zipcpu/trunk/sw |
114 |
Fixes a bug that killed make binutils before the build-gas directory
was created. |
dgisselq |
2958d 22h |
/zipcpu/trunk/sw |
113 |
Bug fix: the Makefile wasn't building gcc, and the binutils would not allocate
space for common variables or zero'd (bss) variables properly. Several binutils
bugs were fixed to get variables to be allocated properly. Those are
reflected in this updated patch. |
dgisselq |
2959d 01h |
/zipcpu/trunk/sw |
112 |
Removed some debugging code from the compiler. |
dgisselq |
2961d 21h |
/zipcpu/trunk/sw |
111 |
Bug fix compiler update! This fixes a lot of the bugs associated with the
previous compiler release. |
dgisselq |
2961d 21h |
/zipcpu/trunk/sw |
110 |
The makefile no longer requires (or supports) building the obsolete machine
code test file optest. |
dgisselq |
2961d 21h |
/zipcpu/trunk/sw |
109 |
This file is now marked as obsolete. |
dgisselq |
2961d 21h |
/zipcpu/trunk/sw |
105 |
Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC. |
dgisselq |
2977d 21h |
/zipcpu/trunk/sw |
104 |
An updated build script, actually builds zip-gcc. |
dgisselq |
2978d 21h |
/zipcpu/trunk/sw |
103 |
A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete. |
dgisselq |
2979d 02h |
/zipcpu/trunk/sw |
102 |
Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.) |
dgisselq |
2981d 10h |
/zipcpu/trunk/sw |
101 |
Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler. |
dgisselq |
2983d 13h |
/zipcpu/trunk/sw |
100 |
Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.) |
dgisselq |
2983d 13h |
/zipcpu/trunk/sw |
99 |
Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file. |
dgisselq |
2983d 13h |
/zipcpu/trunk/sw |
98 |
Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality. |
dgisselq |
2983d 13h |
/zipcpu/trunk/sw |
97 |
Added longjump instructions. |
dgisselq |
2983d 13h |
/zipcpu/trunk/sw |
96 |
Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses. |
dgisselq |
2983d 13h |
/zipcpu/trunk/sw |
95 |
Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value. |
dgisselq |
2985d 19h |
/zipcpu/trunk/sw |
94 |
These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.
The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/. |
dgisselq |
3010d 17h |
/zipcpu/trunk/sw |
93 |
A BINUTILS BACKEND IS NOW AVAILABLE!!!! |
dgisselq |
3018d 14h |
/zipcpu/trunk/sw |
89 |
Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.
Further zopcodes.cpp contains several bug fixes. |
dgisselq |
3018d 14h |
/zipcpu/trunk/sw |
70 |
Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes. |
dgisselq |
3049d 16h |
/zipcpu/trunk/sw |
69 |
This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture. |
dgisselq |
3055d 20h |
/zipcpu/trunk/sw |
60 |
Fixed assembler processing of jump instructions, so that the new fast
return instruction can be used. The test file was modified to test
pipelined value passing within the CPU. That's where the value gets
(re)used before being stored back in the register file. As of this release,
all tests work. |
dgisselq |
3116d 21h |
/zipcpu/trunk/sw |
59 |
Adjusted these library routines to use the new stack frame and calling
conventions. |
dgisselq |
3116d 21h |
/zipcpu/trunk/sw |