Rev |
Log message |
Author |
Age |
Path |
117 |
Bug fixes: This adds the zip_ucc() instruction as a builtin, fixes the zip_cc()
builtin (both are now unspec_volatile) together with fixing the *_context(int*)
builtins so that they use five registers, never four. Further, this fixes the
negative stack space offset bug. Many of the GCC files now have Zip debugging
hooks within them as well, to simplify further debugging of the compiler. |
dgisselq |
2947d 12h |
/zipcpu/trunk |
116 |
Updated binutils. This fixes problems with linking global variables, fixes
the map file report, adjusts the LJMP instruction disassembly to display the
resulting address, as well as in general fixing up link problems when
sizeof(byte) is 32-bits. |
dgisselq |
2947d 12h |
/zipcpu/trunk |
115 |
A bug fix, applies to when there are more than 9 interrupt lines into the CPU. |
dgisselq |
2947d 12h |
/zipcpu/trunk |
114 |
Fixes a bug that killed make binutils before the build-gas directory
was created. |
dgisselq |
2952d 13h |
/zipcpu/trunk |
113 |
Bug fix: the Makefile wasn't building gcc, and the binutils would not allocate
space for common variables or zero'd (bss) variables properly. Several binutils
bugs were fixed to get variables to be allocated properly. Those are
reflected in this updated patch. |
dgisselq |
2952d 17h |
/zipcpu/trunk |
112 |
Removed some debugging code from the compiler. |
dgisselq |
2955d 12h |
/zipcpu/trunk |
111 |
Bug fix compiler update! This fixes a lot of the bugs associated with the
previous compiler release. |
dgisselq |
2955d 13h |
/zipcpu/trunk |
110 |
The makefile no longer requires (or supports) building the obsolete machine
code test file optest. |
dgisselq |
2955d 13h |
/zipcpu/trunk |
109 |
This file is now marked as obsolete. |
dgisselq |
2955d 13h |
/zipcpu/trunk |
108 |
Just to clarify expectations ... this makefile hardly builds anything. |
dgisselq |
2965d 14h |
/zipcpu/trunk |
107 |
Adding a missing file. |
dgisselq |
2966d 05h |
/zipcpu/trunk |
106 |
Updated to allow building without the sources for the graphics used in the
document. |
dgisselq |
2966d 09h |
/zipcpu/trunk |
105 |
Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC. |
dgisselq |
2971d 13h |
/zipcpu/trunk |
104 |
An updated build script, actually builds zip-gcc. |
dgisselq |
2972d 13h |
/zipcpu/trunk |
103 |
A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete. |
dgisselq |
2972d 18h |
/zipcpu/trunk |
102 |
Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.) |
dgisselq |
2975d 02h |
/zipcpu/trunk |
101 |
Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler. |
dgisselq |
2977d 05h |
/zipcpu/trunk |
100 |
Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.) |
dgisselq |
2977d 05h |
/zipcpu/trunk |
99 |
Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file. |
dgisselq |
2977d 05h |
/zipcpu/trunk |
98 |
Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality. |
dgisselq |
2977d 05h |
/zipcpu/trunk |