OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] - Rev 80

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
80 Bug fix: declared the (combined) multiply to be signed again. Also
changed the name of the generate'd for block, to keep ISE from complaining.
dgisselq 3026d 04h /
79 Adjusted the opcodes for NOOP, BREAK, and LOCK. dgisselq 3030d 08h /
78 Found/corrected annoying bug in floating point documentation of the opcode
table.
dgisselq 3030d 08h /
77 First check-in: the test bench for the divide instruction. dgisselq 3031d 07h /
76 The biggest change here was to zippy_tb, to make it more similar to the debugger
and to make it work with VLIW-type instructions.
dgisselq 3031d 07h /
75 Modified for VLIW instructions. dgisselq 3031d 07h /
74 Added a bunch of debugging code to the Dhrystone benchmark assembly file, as
well as two new testing assembly files.
dgisselq 3031d 07h /
73 Documentations updates. dgisselq 3031d 07h /
72 Some updated graphics, now containing images of the CPU that include the
divide and (currently non-existant) floating point unit.
dgisselq 3031d 07h /
71 This contains a bunch of bug fixes. (A lot ...) For example, the pipeline
stall code has also seriously changed, to fixed the pipeline memory load/op
stage conflict, while maintaining no-stall operation for operands that don't
need an offset. This had a cascading effect, however, so that the multiply
could no longer complete in a single cycle. Therefore, the timing on the
multiplies was slowed down to two cycles from a single cycle. (It's the
only two-cycle ALU operation ...) The illegal instruction code has also been
fixed, so that illegal instructions no longer stalls the prefetch bus.
dgisselq 3031d 07h /
70 Updated the assembler support files, zopcodes in particular, to handle
the disassembly of the new very long instruction word codes.
dgisselq 3031d 08h /
69 This implements the "new Instruction Set" architecture for the Zip CPU. It's
a massive change set, that touches just about everything but probably not
enough of everything. Please see the spec.pdf for a description of this
new architecture.
dgisselq 3037d 12h /
68 Updated specification, includes well illustrated pipeline discussion. dgisselq 3072d 12h /
67 Includes timing diagrams in support of a very descriptive specification section. dgisselq 3072d 12h /
66 Adjusted the support for the DEBUG_SCOPE within these so that it can be
compiled in, or not, based upon an external build configuration file: cpudefs.v.
That allows me to make that file project specific, while the rest of the CPU
is shared among all projects.
dgisselq 3098d 12h /
65 Lots of logic simplifications to the core, in addition to better support for
illegal instruction detection and bus error detection. The biggest change
had to deal with pushing the debug write interface into the ALU write
processing path. This simplifies the logic of adjusting the PC and CC
registers primarily, but also any writes to other registers. It also delays
these register writes by a clock, but since the debug interface is already
ridiculously slow I doubt that matters any.
dgisselq 3098d 12h /
64 Shuffled some comments into here from elsewhere. dgisselq 3098d 12h /
63 Simplified bus interactions, and added support for detecting illegal
instructions (i.e. bus errors) in the pipefetch routine.
dgisselq 3098d 12h /
62 Simplified the subtraction logic, so the carry bit no longer depends on
a separate 32-bit operation but becomes part of the subtract operation.
dgisselq 3098d 12h /
61 Simplified the bus delay logic. Depends upon the stall line being irrelevant
outside of a bus cycle.
dgisselq 3098d 12h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.