OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [sw/] - Rev 36

Rev

Directory listing | View Log | Compare with Previous | RSS feed

Last modification

  • Rev 36, 2010-10-29 17:05:31 GMT
  • Author: rfajardo
  • Log message:
    utils: -adding a 32 to 8 bit Wishbone bridge to connect 8 bit modules to the MinSoC interconnect.
    -adding a Linux driver for parallel cables for the adv_jtag_bridge. It circumvents the necessity of privilege to run adv_jtag_bridge with cables xpc3 and xess.

    sw/support: support library has been made completely standalone. That means, it is now independent from uClib and/or newlib. Thanks to Wojciech A. Koszek for his contribution on this.

    sw/drivers: a driver library has been included, which supply drivers for the OpenRISC timer; and for UART, Ethernet, I2C, and CAN modules from OpenCores.

    sw/uart and sw/eth: they don't provide code to control the UART and Ethernet controllers anymore. They use the drivers library instead.

    Documentation:
    -FAQ extended:
    -table of contents
    -explanation of how to use the 32 to 8 bit Wishbone bridge
    -how to make adv_jtag_bridge work without privilege requirement for xess or xpc3
    -explanation of locking problem of xpc_usb cable
    -explanation of what to do if the cable is built on-board
    -INSTALL:
    -patching of gdb only required if version is 6.8, explanation on FAQ now.
    -HOWTO:
    -instruct to compile drivers library
    -remove line numbers information on what to edit, better leave it to be found only by the informed context.
    -adv_jtag_bridge execution now without 'sudo'. Note included that 'sudo' is required for Linux and xess or xpc3. Reference to FAQ to avoid this requirement.

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.