1/1 
|
CRC generator
by Unknown on Sep 25, 2008 |
Not available! | ||
|
Hi,
I need a configurable input data width, 32 bit CRC generator. I downloaded "ultimate_crc" from open cores. But one file down load says "wb_tb_pack.vhd is reused from the spdif project. Fetch the latest revision of this file from there." I am not able to find what is this spdif project. Please help me in finiding this file. Thanks Anulekha |
|||
|
CRC generator
by Unknown on Sep 25, 2008 |
Not available! | ||
|
Hi
Have a look at the free one at
http://www.think-silicon.com/ipgenius.php?module=CRC_generator
Regards
Ian.
anulekha.aeranki at wipro.com wrote:
Hi,
I need a configurable input data width, 32 bit CRC generator.
I downloaded "ultimate_crc" from open cores. But one file down load
says "wb_tb_pack.vhd is reused from the spdif project. Fetch the latest
revision of this file from there." I am not able to find what is this spdif
project. Please help me in finiding this file.
Thanks
Anulekha
_______________________________________________
http://www.opencores.org/mailman/listinfo/cores
|
|||
|
CRC generator
by UmairSiddiqui on Sep 25, 2008 |
UmairSiddiqui
Posts: 21 Joined: Aug 13, 2005 Last seen: Sep 19, 2016 |
||
|
http://www.easics.com/webtools/crctool
On Thu, Sep 25, 2008 at 7:44 AM, anulekha.aeranki at wipro.com> wrote:
Hi,
I need a configurable input data width, 32 bit CRC generator.
I downloaded "ultimate_crc" from open cores. But one file down load
says "wb_tb_pack.vhd is reused from the spdif project. Fetch the latest
revision of this file from there." I am not able to find what is this spdif
project. Please help me in finiding this file.
Thanks
Anulekha
_______________________________________________
http://www.opencores.org/mailman/listinfo/cores
|
|||
|
CRC generator
by Unknown on Sep 26, 2008 |
Not available! | ||
|
you can modify this code, it is very compact, but I have not tested it:
//Calculates CRC7
module crc #(
parameter integer len = 7;
parameter [len-1:0] poly = 7'b0001001;
)(
input wire rst;
input wire clk;
input wire clr;
input wire din;
input wire ena;
output reg [len-1:0] crc;
);
always @ (posedge clk, posedge rst) begin
if (rst) crc anulekha.aeranki at w...>
To:
Date: Thu Sep 25 04:44:14 CEST 2008
Subject: [oc] CRC generator
Hi,
I need a configurable input data width, 32 bit CRC generator. I downloaded "ultimate_crc" from open cores. But one file down load says "wb_tb_pack.vhd is reused from the spdif project. Fetch the latest revision of this file from there." I am not able to find what is this spdif project. Please help me in finiding this file. Thanks Anulekha |
|||
1/1