1/1 
|
CAN Protocol Controller : Whisbone I/F: SOLVED
by Unknown on Oct 10, 2008 |
Not available! | ||
|
Hi,
I solved this problem simulating the CAN IP. Initialization on reset
of some signals is needed. Changes on can_top.v I made are:
always @ (posedge wb_clk_i)
begin
cs_ack1 peio at a...>
To:
Date: Mon Sep 29 14:09:59 CEST 2008
Subject: [oc] CAN Protocol Controller : Whisbone I/F
Hi,
I'm simulating the CAN Protocol Controller with Whisbone I/F and I found a bad response on wb_ack_o signal. Is someone tested the CAN Controller Whisbone I/F?. Regards, Peio -------------- next part -------------- An HTML attachment was scrubbed... URL: attachment.html |
|||
1/1