1/1 
|
M-DVE video encoder from Maxim Vlasov
by Unknown on May 1, 2004 |
Not available! | ||
|
Hello,
Has anyone gotten his core to work?
Thanks,
Hiten Sonpal
Project Manager, CIHOLAS Enterprises Voice: 812 476 2721 x 102
255 S Garvin St, Suite B Fax: 812 476 2881
Evansville, IN 47713 http://www.ciholas.com
----- Original Message -----
From: "Hill, Shannon" shill at c...>
To: "'cores at o...'" cores at o...>
Date: Thu, 9 Oct 2003 11:50:49 -0400
Subject: [oc] M-DVE video encoder from Maxim Vlasov
Is it typical for designs on opencores.org to have deliberate bugs?
Here's a response I received from Maxim Vlasov on a couple of
problems I found
in his M-DVE ntsc/pal video encoder that's available on opencores.
I was surprised.
-----Original Message-----
From: Maxim Y. Vlasov [mailto:maxismsx at h...]
Sent: Wednesday, October 08, 2003 10:54 AM
To: shill at c...
Subject: Re: FW: DVE Encoder
Dear Hill,
You are absolutely right. You have found one of the deliberately
made bugs in the version published on the internet. There are still
4 left. One in multipliers, one in burst generator, one in
quadrature mixer and finally one in overall datapath logic. More
over the NCO jitter is somewhat 30% above the standard, which is
fine for CIF resolution, however absolutely unacceptable for SDTV
quality. As I just mentioned, the code is not fully functional, but
just a working demo, which would give a clue about the principles
and the size of the commercial cores. I just returned back from the
business trip and had no chance to complete one page description of
M-DVE II and M-DVE III cores.
In a next few days I plan to send these papers to you.
Sincerely,
Maxim
|
|||
|
M-DVE video encoder from Maxim Vlasov
by Unknown on Jun 2, 2004 |
Not available! | ||
|
Hi All
I'll be very appreciated, if any one send "M-DVE video encoder" Verilog
HDL source code.
Have a nice day
Satish
----- Original Message -----
From: Hiten Sonpalsonpal at p...>
To:
Date: Sat May 1 02:45:32 CEST 2004
Subject: [oc] M-DVE video encoder from Maxim Vlasov
Hello,
Has anyone gotten his core to work?
Thanks,
Hiten Sonpal
Project Manager, CIHOLAS Enterprises Voice: 812 476 2721 x 102
255 S Garvin St, Suite B Fax: 812 476 2881
Evansville, IN 47713 http://www.ciholas.com
----- Original Message -----
From: "Hill, Shannon" shill at c...>
To: "'cores at o...'" cores at o...>
Date: Thu, 9 Oct 2003 11:50:49 -0400
Subject: [oc] M-DVE video encoder from Maxim Vlasov
> Is it typical for designs on opencores.org to have deliberate
bugs?
>
> Here's a response I received from Maxim Vlasov on a couple of > problems I found > in his M-DVE ntsc/pal video encoder that's available on opencores.
>
> I was surprised.
>
>
>
> -----Original Message-----
> From: Maxim Y. Vlasov [mailto:maxismsx at h...]
> Sent: Wednesday, October 08, 2003 10:54 AM
> To: shill at c...
> Subject: Re: FW: DVE Encoder
>
>
>
>
> Dear Hill,
>
> You are absolutely right. You have found one of the
deliberately
> made bugs in the version published on the internet. There are
still
> 4 left. One in multipliers, one in burst generator, one in
> quadrature mixer and finally one in overall datapath logic. More
> over the NCO jitter is somewhat 30% above the standard, which
is
> fine for CIF resolution, however absolutely unacceptable for
SDTV
> quality. As I just mentioned, the code is not fully
functional, but
> just a working demo, which would give a clue about the
principles
> and the size of the commercial cores. I just returned back
from the
> business trip and had no chance to complete one page
description of
> M-DVE II and M-DVE III cores.
> > In a next few days I plan to send these papers to you. > > Sincerely, > > Maxim > > |
|||
|
M-DVE video encoder from Maxim Vlasov
by Unknown on Nov 16, 2004 |
Not available! | ||
|
No news?
I'd like to try M-DVE encoder.
Best Regards
Roberto Cerati
----- Original Message -----
From: Hiten Sonpalsonpal at p...>
To:
Date: Sat May 1 02:45:32 CEST 2004
Subject: [oc] M-DVE video encoder from Maxim Vlasov
Hello,
Has anyone gotten his core to work?
Thanks,
Hiten Sonpal
Project Manager, CIHOLAS Enterprises Voice: 812 476 2721 x 102
255 S Garvin St, Suite B Fax: 812 476 2881
Evansville, IN 47713 http://www.ciholas.com
----- Original Message -----
From: "Hill, Shannon" shill at c...>
To: "'cores at o...'" cores at o...>
Date: Thu, 9 Oct 2003 11:50:49 -0400
Subject: [oc] M-DVE video encoder from Maxim Vlasov
> Is it typical for designs on opencores.org to have deliberate
bugs?
>
> Here's a response I received from Maxim Vlasov on a couple of > problems I found > in his M-DVE ntsc/pal video encoder that's available on opencores.
>
> I was surprised.
>
>
>
> -----Original Message-----
> From: Maxim Y. Vlasov [mailto:maxismsx at h...]
> Sent: Wednesday, October 08, 2003 10:54 AM
> To: shill at c...
> Subject: Re: FW: DVE Encoder
>
>
>
>
> Dear Hill,
>
> You are absolutely right. You have found one of the
deliberately
> made bugs in the version published on the internet. There are
still
> 4 left. One in multipliers, one in burst generator, one in
> quadrature mixer and finally one in overall datapath logic. More
> over the NCO jitter is somewhat 30% above the standard, which
is
> fine for CIF resolution, however absolutely unacceptable for
SDTV
> quality. As I just mentioned, the code is not fully
functional, but
> just a working demo, which would give a clue about the
principles
> and the size of the commercial cores. I just returned back
from the
> business trip and had no chance to complete one page
description of
> M-DVE II and M-DVE III cores.
> > In a next few days I plan to send these papers to you. > > Sincerely, > > Maxim > > |
|||
1/1