OpenCores
no use no use 1/1 no use no use
Xilinx ISE 6.2i (Linux and Windows)
by Unknown on Jul 14, 2004
Not available!
Hi:

I have a querry here. I have made a small design using Aquarius
processor (opencores), single port ram (generated using Xilinx Coregen)
and some other modules.
When I implement my design using Xilinx ISE on Linux Redhat 8, nothing
works. I simulated with post-layout and post-translate simulation models
and the output fails. On linux platform, RTL simulation is passing so I
believe the problem is in synthesis of design (which uses XST).
With the same design, when I implement using Xilinx ISE on windows
platform, everything works (even my eval board).

Can someone justify this difference and give me a solution to this
issue. I really want to use Linux for development.

Thanks

Praveen Durga
SoC Research Lab
2East 2.24
University of Bath
Bath, England, UK




Xilinx ISE 6.2i (Linux and Windows)
by Unknown on Jul 15, 2004
Not available!
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Can someone justify this difference and give me a solution to this
issue. I really want to use Linux for development.


I could give you another alternative... You might try running the Windows
version of ISE under WINE.. That's what I'm using right now.. Grated, I've
not done any post RTL simulation either, but synthesis seems to work fine.. I
have to clear out the project files each time before I do a synthesis
though..

- --
with metta,
Shawn Tan

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFA9cuRUgUYbQRKphMRAuH+AJ9XTG4x6LFTmGWqGk/ktwlOapwIXACfUUEy
o8AwW+jcokH/b6MOniRFi8Q=
=JQ+S
-----END PGP SIGNATURE-----



Xilinx ISE 6.2i (Linux and Windows)
by Unknown on Jul 15, 2004
Not available!
>>>>> "Shawn" == Shawn Tan Ser Ngiap shawn.tan at aeste.net> writes: Shawn> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >> Can someone justify this difference and give me a solution to this >> issue. I really want to use Linux for development. Shawn> I could give you another alternative... You might try running the Shawn> Windows version of ISE under WINE.. That's what I'm using right Shawn> now.. Grated, I've not done any post RTL simulation either, but Shawn> synthesis seems to work fine.. I have to clear out the project Shawn> files each time before I do a synthesis though.. That's an artefact of the 040615 Wine release. Try a newer wine, e.g. from CVS and the cleanup is no longer needed. Bye -- Uwe Bonnes bon at elektron.ikp.physik.tu-darmstadt.de Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
no use no use 1/1 no use no use
© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.