OpenCores

OpenCores

Problem Compiling JOP with Quartus 5.1

no use

no use

1/1

no use

no use

Problem Compiling JOP with Quartus 5.1 by Unknown on Dec 12, 2005			Not available!
While compiling JOP processor (www.jopdesign.com) with Quatus 5.1 Web Edition, I am getting a ridiculously low LE count of around 60. There is no error in compilation, but tons of warning about stuck data, clock etc., but I can't see anything wrong with the code. In past, I have compiled JOP with Quartus 4.2 without any problem. Anybody has any idea what could be wrong? Thanks. -- Pratip While compiling JOP processor (www.jopdesign.com) with Quatus 5.1 Web Edition, I am getting a ridiculously low LE count of around 60. There is no error in compilation, but tons of warning about stuck data, clock etc., but I can't see anything wrong with the code. In past, I have compiled JOP with Quartus 4.2 without any problem. Anybody has any idea what could be wrong? Thanks. -- Pratip

Problem Compiling JOP with Quartus 5.1 by Unknown on Dec 13, 2005			Not available!
Which project are you compiling? Did you check out the project in the last days? I've changed JOP to use the new SimpCon interface to IO devices and the main memory. I've probably not updated each project up to now. However, cycmin and cyc12min should work out-of-the-box. You can also try to use the Makefile. Martin ----- Original Message ----- From: <<A HREF="http://www.opencores.org/mailman/listinfo/cores">pratip.mukherjee at fmr.com</A>> To: <<A HREF="http://www.opencores.org/mailman/listinfo/cores">cores at opencores.org</A>> Sent: Monday, December 12, 2005 7:38 PM Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q] While compiling JOP processor (www.jopdesign.com) with Quatus 5.1 Web Edition, I am getting a ridiculously low LE count of around 60. There is no error in compilation, but tons of warning about stuck data, clock etc., but I can't see anything wrong with the code. In past, I have compiled JOP with Quartus 4.2 without any problem. Anybody has any idea what could be wrong? Thanks. -- Pratip _______________________________________________ <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A>[/q] Which project are you compiling? Did you check out the project in the last days? I've changed JOP to use the new SimpCon interface to IO devices and the main memory. I've probably not updated each project up to now. However, cycmin and cyc12min should work out-of-the-box. You can also try to use the Makefile. Martin ----- Original Message ----- From: pratip.mukherjee at fmr.com> To: cores at opencores.org> Sent: Monday, December 12, 2005 7:38 PM Subject: [oc] Problem Compiling JOP with Quartus 5.1 While compiling JOP processor (www.jopdesign.com) with Quatus 5.1 Web Edition, I am getting a ridiculously low LE count of around 60. There is no error in compilation, but tons of warning about stuck data, clock etc., but I can't see anything wrong with the code. In past, I have compiled JOP with Quartus 4.2 without any problem. Anybody has any idea what could be wrong? Thanks. -- Pratip _______________________________________________ http://www.opencores.org/mailman/listinfo/cores

Problem Compiling JOP with Quartus 5.1 by Unknown on Dec 15, 2005			Not available!
I was having problem with both cycmin and cyc12min. Anyway, the problem is resolved now. I delete my jop directory and retrieved everything again. That has solved the problem. In the java file com.jopdesign.build.JOPizer.java, what is the use of import com.sun.corba.se.ActivationIDL.Repository; I don't have that class, and does not look like is needed for compilation. ----- Original Message ----- From: Martin Schoeberl<<A HREF="http://www.opencores.org/mailman/listinfo/cores">martin at j...</A>> To: Date: Tue Dec 13 11:06:11 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q] Which project are you compiling? Did you check out the project in the last days? I've changed JOP to use the new SimpCon interface to IO devices and the main memory. I've probably not updated each project up to now. However, cycmin and cyc12min should work out-of-the-box. You can also try to use the Makefile. Martin ----- Original Message ----- From: <pratip.mukherjee at fmr.com> To: <cores at opencores.org> Sent: Monday, December 12, 2005 7:38 PM Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q]> While compiling JOP processor (www.jopdesign.com) with Quatus [/q] 5.1 [q]> Web Edition, I am getting a ridiculously low LE count of [/q] around 60. [q]> There is no error in compilation, but tons of warning about [/q] stuck data, [q]> clock etc., but I can't see anything wrong with the code. In [/q] past, I [q]> have compiled JOP with Quartus 4.2 without any problem. [/q] Anybody has [q]> any idea what could be wrong? > Thanks. > > -- Pratip > _______________________________________________ > <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A> [/q] [/q] I was having problem with both cycmin and cyc12min. Anyway, the problem is resolved now. I delete my jop directory and retrieved everything again. That has solved the problem. In the java file com.jopdesign.build.JOPizer.java, what is the use of import com.sun.corba.se.ActivationIDL.Repository; I don't have that class, and does not look like is needed for compilation. ----- Original Message ----- From: Martin Schoeberlmartin at j...> To: Date: Tue Dec 13 11:06:11 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 Which project are you compiling? Did you check out the project in the last days? I've changed JOP to use the new SimpCon interface to IO devices and the main memory. I've probably not updated each project up to now. However, cycmin and cyc12min should work out-of-the-box. You can also try to use the Makefile. Martin ----- Original Message ----- From: To: Sent: Monday, December 12, 2005 7:38 PM Subject: [oc] Problem Compiling JOP with Quartus 5.1 > While compiling JOP processor (www.jopdesign.com) with Quatus 5.1 > Web Edition, I am getting a ridiculously low LE count of around 60. > There is no error in compilation, but tons of warning about stuck data, > clock etc., but I can't see anything wrong with the code. In past, I > have compiled JOP with Quartus 4.2 without any problem. Anybody has > any idea what could be wrong? > Thanks. > > -- Pratip > _______________________________________________ > http://www.opencores.org/mailman/listinfo/cores

Problem Compiling JOP with Quartus 5.1 by Unknown on Dec 16, 2005			Not available!
Fine to hear that it works now for you. About the import in JOPizer: This was a mistake that happend perhaps during typing in Eclipse, sorry. I've updated the CVS with a JOPizer version where this import statement is removed. Martin ----- Original Message ----- From: <<A HREF="http://www.opencores.org/mailman/listinfo/cores">pratip.mukherjee at fmr.com</A>> To: <<A HREF="http://www.opencores.org/mailman/listinfo/cores">cores at opencores.org</A>> Sent: Thursday, December 15, 2005 6:11 PM Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 [q]I was having problem with both cycmin and cyc12min. Anyway, the problem is resolved now. I delete my jop directory and retrieved everything again. That has solved the problem. In the java file com.jopdesign.build.JOPizer.java, what is the use of import com.sun.corba.se.ActivationIDL.Repository; I don't have that class, and does not look like is needed for compilation. ----- Original Message ----- From: Martin Schoeberl<<A HREF="http://www.opencores.org/mailman/listinfo/cores">martin at j...</A>> To: Date: Tue Dec 13 11:06:11 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q] Which project are you compiling? Did you check out the project in the last days? I've changed JOP to use the new SimpCon interface to IO devices and the main memory. I've probably not updated each project up to now. However, cycmin and cyc12min should work out-of-the-box. You can also try to use the Makefile. Martin ----- Original Message ----- From: <pratip.mukherjee at fmr.com> To: <cores at opencores.org> Sent: Monday, December 12, 2005 7:38 PM Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q]> While compiling JOP processor (www.jopdesign.com) with Quatus [/q] 5.1 [q]> Web Edition, I am getting a ridiculously low LE count of [/q] around 60. [q]> There is no error in compilation, but tons of warning about [/q] stuck data, [q]> clock etc., but I can't see anything wrong with the code. In [/q] past, I [q]> have compiled JOP with Quartus 4.2 without any problem. [/q] Anybody has [q]> any idea what could be wrong? > Thanks. > > -- Pratip > _______________________________________________ > <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A> [/q] [/q] _______________________________________________ <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A>[/q] Fine to hear that it works now for you. About the import in JOPizer: This was a mistake that happend perhaps during typing in Eclipse, sorry. I've updated the CVS with a JOPizer version where this import statement is removed. Martin ----- Original Message ----- From: pratip.mukherjee at fmr.com> To: cores at opencores.org> Sent: Thursday, December 15, 2005 6:11 PM Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 I was having problem with both cycmin and cyc12min. Anyway, the problem is resolved now. I delete my jop directory and retrieved everything again. That has solved the problem. In the java file com.jopdesign.build.JOPizer.java, what is the use of import com.sun.corba.se.ActivationIDL.Repository; I don't have that class, and does not look like is needed for compilation. ----- Original Message ----- From: Martin Schoeberlmartin at j...> To: Date: Tue Dec 13 11:06:11 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 Which project are you compiling? Did you check out the project in the last days? I've changed JOP to use the new SimpCon interface to IO devices and the main memory. I've probably not updated each project up to now. However, cycmin and cyc12min should work out-of-the-box. You can also try to use the Makefile. Martin ----- Original Message ----- From: To: Sent: Monday, December 12, 2005 7:38 PM Subject: [oc] Problem Compiling JOP with Quartus 5.1 > While compiling JOP processor (www.jopdesign.com) with Quatus 5.1 > Web Edition, I am getting a ridiculously low LE count of around 60. > There is no error in compilation, but tons of warning about stuck data, > clock etc., but I can't see anything wrong with the code. In past, I > have compiled JOP with Quartus 4.2 without any problem. Anybody has > any idea what could be wrong? > Thanks. > > -- Pratip > _______________________________________________ > http://www.opencores.org/mailman/listinfo/cores _______________________________________________ http://www.opencores.org/mailman/listinfo/cores

Problem Compiling JOP with Quartus 5.1 by Unknown on Dec 20, 2005			Not available!
Everything builds fine now but while downloading thru serial line, I am getting data errors. I enabled the traces in down.exe to print the bytes send and received, and this is a portion of what I am seeing: E:\Designs\jop\java\target>..\..\down -e dist\bin\test_Hello.jop COM1 2505 words of Java bytecode (9 KB) 0-0 0-0 17-16 132-128 0-0 0-0 9-12 202-239 42-14 183-146 0-0 1-0 42-14 18-18 2-2 180-156 0-0 3-2 181-156 0-0 3-2 177-144 0-0 0-0 42- 14 183-146 0-0 1-0 42-14 43-14 180-144 0-0 3-2 181-144 0-0 3-3 177- 144 0-0 0-0 0-0 42-15 183-146 0-0 1-0 At first I thought there is a Baudrate mismatch, so modified down.exe and the VHDL to operate at 9600. That did not help and produced the same byte patterns as above. Tonight, I'll use SignalTap and try to find out what is going on. Does anyone have any other idea I should try out first? ----- Original Message ----- From: Martin Schoeberl<<A HREF="http://www.opencores.org/mailman/listinfo/cores">martin at j...</A>> To: Date: Fri Dec 16 12:01:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q] Fine to hear that it works now for you. About the import in JOPizer: This was a mistake that happend perhaps during typing in Eclipse, sorry. I've updated the CVS with a JOPizer version where this import statement is removed. Martin ----- Original Message ----- From: <pratip.mukherjee at fmr.com> To: <cores at opencores.org> Sent: Thursday, December 15, 2005 6:11 PM Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 [q]>I was having problem with both cycmin and cyc12min. > Anyway, the problem is resolved now. I delete my jop directory [/q] and [q]> retrieved everything again. That has solved the problem. > > In the java file com.jopdesign.build.JOPizer.java, what is the [/q] use of [q]> import com.sun.corba.se.ActivationIDL.Repository; > I don't have that class, and does not look like is needed for [/q] compilation. [q]> > ----- Original Message ----- > From: Martin Schoeberl<martin at j...> > To: > Date: Tue Dec 13 11:06:11 CET 2005 > Subject: [oc] Problem Compiling JOP with Quartus 5.1 > [q]> Which project are you compiling? Did you check out the [/q] project [q]> in the last days? I've changed JOP to use the new SimpCon [/q] interface [q]> to IO devices and the main memory. I've probably not [/q] updated each [q]> project up to now. However, cycmin and cyc12min should [/q] work [q]> out-of-the-box. You can also try to use the Makefile. > Martin > ----- Original Message ----- > From: <pratip.mukherjee at fmr.com> > To: <cores at opencores.org> > Sent: Monday, December 12, 2005 7:38 PM > Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q] > While compiling JOP processor (www.jopdesign.com) [/q] with Quatus [q]> 5.1 [q] > Web Edition, I am getting a ridiculously low LE count [/q] of [q]> around 60. [q] > There is no error in compilation, but tons of warning [/q] about [q]> stuck data, [q] > clock etc., but I can't see anything wrong with the [/q] code. In [q]> past, I [q] > have compiled JOP with Quartus 4.2 without any [/q] problem. [q]> Anybody has [q] > any idea what could be wrong? > Thanks. > > -- Pratip > _______________________________________________ > <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A> [/q] > > [/q] > _______________________________________________ > <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A> [/q] [/q] Everything builds fine now but while downloading thru serial line, I am getting data errors. I enabled the traces in down.exe to print the bytes send and received, and this is a portion of what I am seeing: E:\Designs\jop\java\target>..\..\down -e dist\bin\test_Hello.jop COM1 2505 words of Java bytecode (9 KB) 0-0 0-0 17-16 132-128 0-0 0-0 9-12 202-239 42-14 183-146 0-0 1-0 42-14 18-18 2-2 180-156 0-0 3-2 181-156 0-0 3-2 177-144 0-0 0-0 42- 14 183-146 0-0 1-0 42-14 43-14 180-144 0-0 3-2 181-144 0-0 3-3 177- 144 0-0 0-0 0-0 42-15 183-146 0-0 1-0 At first I thought there is a Baudrate mismatch, so modified down.exe and the VHDL to operate at 9600. That did not help and produced the same byte patterns as above. Tonight, I'll use SignalTap and try to find out what is going on. Does anyone have any other idea I should try out first? ----- Original Message ----- From: Martin Schoeberlmartin at j...> To: Date: Fri Dec 16 12:01:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 Fine to hear that it works now for you. About the import in JOPizer: This was a mistake that happend perhaps during typing in Eclipse, sorry. I've updated the CVS with a JOPizer version where this import statement is removed. Martin ----- Original Message ----- From: To: Sent: Thursday, December 15, 2005 6:11 PM Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 >I was having problem with both cycmin and cyc12min. > Anyway, the problem is resolved now. I delete my jop directory and > retrieved everything again. That has solved the problem. > > In the java file com.jopdesign.build.JOPizer.java, what is the use of > import com.sun.corba.se.ActivationIDL.Repository; > I don't have that class, and does not look like is needed for compilation. > > ----- Original Message ----- > From: Martin Schoeberl > To: > Date: Tue Dec 13 11:06:11 CET 2005 > Subject: [oc] Problem Compiling JOP with Quartus 5.1 > > Which project are you compiling? Did you check out the project > in the last days? I've changed JOP to use the new SimpCon interface > to IO devices and the main memory. I've probably not updated each > project up to now. However, cycmin and cyc12min should work > out-of-the-box. You can also try to use the Makefile. > Martin > ----- Original Message ----- > From: > To: > Sent: Monday, December 12, 2005 7:38 PM > Subject: [oc] Problem Compiling JOP with Quartus 5.1 > While compiling JOP processor (www.jopdesign.com) with Quatus > 5.1 > Web Edition, I am getting a ridiculously low LE count of > around 60. > There is no error in compilation, but tons of warning about > stuck data, > clock etc., but I can't see anything wrong with the code. In > past, I > have compiled JOP with Quartus 4.2 without any problem. > Anybody has > any idea what could be wrong? > Thanks. > > -- Pratip > _______________________________________________ > http://www.opencores.org/mailman/listinfo/cores > > > _______________________________________________ > http://www.opencores.org/mailman/listinfo/cores

Problem Compiling JOP with Quartus 5.1 by Unknown on Jun 18, 2006			Not available!
U r on the right track but need to focus and concentrate so the stupid error messages dont come. Good luck and happy hunting Gopal Da ----- Original Message ----- From: pratip.mukherjee at fmr.com<<A HREF="http://www.opencores.org/mailman/listinfo/cores">pratip.mukherjee at f...</A>> To: Date: Tue Dec 20 18:30:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q] Everything builds fine now but while downloading thru serial line, I am getting data errors. I enabled the traces in down.exe to print the bytes send and received, and this is a portion of what I am seeing: E:\Designs\jop\java\target>..\..\down -e dist\bin\test_Hello.jop COM1 2505 words of Java bytecode (9 KB) 0-0 0-0 17-16 132-128 0-0 0-0 9-12 202-239 42-14 183-146 0-0 1-0 42-14 18-18 2-2 180-156 0-0 3-2 181-156 0-0 3-2 177-144 0-0 0-0 [/q] 42- [q] 14 183-146 0-0 1-0 42-14 43-14 180-144 0-0 3-2 181-144 0-0 3-3 [/q] 177- [q] 144 0-0 0-0 0-0 42-15 183-146 0-0 1-0 At first I thought there is a Baudrate mismatch, so modified down.exe and the VHDL to operate at 9600. That did not help and produced the same byte patterns as above. Tonight, I'll use SignalTap and try to find out what is going on. Does anyone have any other idea I should try out first? ----- Original Message ----- From: Martin Schoeberl<martin at j...> To: Date: Fri Dec 16 12:01:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q]> Fine to hear that it works now for you. > > About the import in JOPizer: This was a mistake that happend > perhaps during typing in Eclipse, sorry. > I've updated the CVS with a JOPizer version where this import > statement is removed. > Martin > ----- Original Message ----- > From: <pratip.mukherjee at fmr.com> > To: <cores at opencores.org> > Sent: Thursday, December 15, 2005 6:11 PM > Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 [q] >I was having problem with both cycmin and cyc12min. > Anyway, the problem is resolved now. I delete my jop [/q] directory [q]> and [q] > retrieved everything again. That has solved the problem. > > In the java file com.jopdesign.build.JOPizer.java, what [/q] is the [q]> use of [q] > import com.sun.corba.se.ActivationIDL.Repository; > I don't have that class, and does not look like is needed [/q] for [q]> compilation. [q] > > ----- Original Message ----- > From: Martin Schoeberl<martin at j...> > To: > Date: Tue Dec 13 11:06:11 CET 2005 > Subject: [oc] Problem Compiling JOP with Quartus 5.1 > [q]>> Which project are you compiling? Did you check out [/q] the [q]> project [q]>> in the last days? I've changed JOP to use the new [/q] SimpCon [q]> interface [q]>> to IO devices and the main memory. I've probably not [/q] > updated each [q]>> project up to now. However, cycmin and cyc12min [/q] should [q]> work [q]>> out-of-the-box. You can also try to use the Makefile. >> Martin >> ----- Original Message ----- >> From: <pratip.mukherjee at fmr.com> >> To: <cores at opencores.org> >> Sent: Monday, December 12, 2005 7:38 PM >> Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q]> > While compiling JOP processor [/q] (www.jopdesign.com) [q]> with Quatus [q]>> 5.1 [q]> > Web Edition, I am getting a ridiculously low LE [/q] count [q]> of [q]>> around 60. [q]> > There is no error in compilation, but tons of [/q] warning [q]> about [q]>> stuck data, [q]> > clock etc., but I can't see anything wrong with [/q] the [q]> code. In [q]>> past, I [q]> > have compiled JOP with Quartus 4.2 without any [/q] > problem. [q]>> Anybody has [q]> > any idea what could be wrong? > > Thanks. > > > > -- Pratip > > _______________________________________________ > > <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A> [/q] >> >> [/q] > _______________________________________________ > <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A> [/q] > > [/q] [/q] U r on the right track but need to focus and concentrate so the stupid error messages dont come. Good luck and happy hunting Gopal Da ----- Original Message ----- From: pratip.mukherjee at fmr.compratip.mukherjee at f...> To: Date: Tue Dec 20 18:30:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 Everything builds fine now but while downloading thru serial line, I am getting data errors. I enabled the traces in down.exe to print the bytes send and received, and this is a portion of what I am seeing: E:\Designs\jop\java\target>..\..\down -e dist\bin\test_Hello.jop COM1 2505 words of Java bytecode (9 KB) 0-0 0-0 17-16 132-128 0-0 0-0 9-12 202-239 42-14 183-146 0-0 1-0 42-14 18-18 2-2 180-156 0-0 3-2 181-156 0-0 3-2 177-144 0-0 0-0 42- 14 183-146 0-0 1-0 42-14 43-14 180-144 0-0 3-2 181-144 0-0 3-3 177- 144 0-0 0-0 0-0 42-15 183-146 0-0 1-0 At first I thought there is a Baudrate mismatch, so modified down.exe and the VHDL to operate at 9600. That did not help and produced the same byte patterns as above. Tonight, I'll use SignalTap and try to find out what is going on. Does anyone have any other idea I should try out first? ----- Original Message ----- From: Martin Schoeberl To: Date: Fri Dec 16 12:01:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 > Fine to hear that it works now for you. > > About the import in JOPizer: This was a mistake that happend > perhaps during typing in Eclipse, sorry. > I've updated the CVS with a JOPizer version where this import > statement is removed. > Martin > ----- Original Message ----- > From: > To: > Sent: Thursday, December 15, 2005 6:11 PM > Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 >I was having problem with both cycmin and cyc12min. > Anyway, the problem is resolved now. I delete my jop directory > and > retrieved everything again. That has solved the problem. > > In the java file com.jopdesign.build.JOPizer.java, what is the > use of > import com.sun.corba.se.ActivationIDL.Repository; > I don't have that class, and does not look like is needed for > compilation. > > ----- Original Message ----- > From: Martin Schoeberl > To: > Date: Tue Dec 13 11:06:11 CET 2005 > Subject: [oc] Problem Compiling JOP with Quartus 5.1 > >> Which project are you compiling? Did you check out the > project >> in the last days? I've changed JOP to use the new SimpCon > interface >> to IO devices and the main memory. I've probably not > updated each >> project up to now. However, cycmin and cyc12min should > work >> out-of-the-box. You can also try to use the Makefile. >> Martin >> ----- Original Message ----- >> From: >> To: >> Sent: Monday, December 12, 2005 7:38 PM >> Subject: [oc] Problem Compiling JOP with Quartus 5.1 > > While compiling JOP processor (www.jopdesign.com) > with Quatus >> 5.1 > > Web Edition, I am getting a ridiculously low LE count > of >> around 60. > > There is no error in compilation, but tons of warning > about >> stuck data, > > clock etc., but I can't see anything wrong with the > code. In >> past, I > > have compiled JOP with Quartus 4.2 without any > problem. >> Anybody has > > any idea what could be wrong? > > Thanks. > > > > -- Pratip > > _______________________________________________ > > http://www.opencores.org/mailman/listinfo/cores >> >> > _______________________________________________ > http://www.opencores.org/mailman/listinfo/cores > >

Problem Compiling JOP with Quartus 5.1 by Unknown on Jun 24, 2006			Not available!
There are small microcode test programms to test the serial line and the memory interface. You can find the description in: <A HREF="http://www.jopdesign.com/doc/build.pdf">http://www.jopdesign.com/doc/build.pdf</A> Seciton 7 Martin ----- Original Message ----- From: <<A HREF="http://www.opencores.org/mailman/listinfo/cores">ashutosh_banerji at hotmail.com</A>> To: <<A HREF="http://www.opencores.org/mailman/listinfo/cores">cores at opencores.org</A>> Sent: Sunday, June 18, 2006 2:19 PM Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 [q] U r on the right track but need to focus and concentrate so the stupid error messages dont come. Good luck and happy hunting Gopal Da ----- Original Message ----- From: pratip.mukherjee at fmr.com<<A HREF="http://www.opencores.org/mailman/listinfo/cores">pratip.mukherjee at f...</A>> To: Date: Tue Dec 20 18:30:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q] Everything builds fine now but while downloading thru serial line, I am getting data errors. I enabled the traces in down.exe to print the bytes send and received, and this is a portion of what I am seeing: E:\Designs\jop\java\target>..\..\down -e dist\bin\test_Hello.jop COM1 2505 words of Java bytecode (9 KB) 0-0 0-0 17-16 132-128 0-0 0-0 9-12 202-239 42-14 183-146 0-0 1-0 42-14 18-18 2-2 180-156 0-0 3-2 181-156 0-0 3-2 177-144 0-0 0-0 [/q] 42- [q] 14 183-146 0-0 1-0 42-14 43-14 180-144 0-0 3-2 181-144 0-0 3-3 [/q] 177- [q] 144 0-0 0-0 0-0 42-15 183-146 0-0 1-0 At first I thought there is a Baudrate mismatch, so modified down.exe and the VHDL to operate at 9600. That did not help and produced the same byte patterns as above. Tonight, I'll use SignalTap and try to find out what is going on. Does anyone have any other idea I should try out first? ----- Original Message ----- From: Martin Schoeberl<martin at j...> To: Date: Fri Dec 16 12:01:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q]> Fine to hear that it works now for you. > > About the import in JOPizer: This was a mistake that happend > perhaps during typing in Eclipse, sorry. > I've updated the CVS with a JOPizer version where this import > statement is removed. > Martin > ----- Original Message ----- > From: <pratip.mukherjee at fmr.com> > To: <cores at opencores.org> > Sent: Thursday, December 15, 2005 6:11 PM > Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 [q] >I was having problem with both cycmin and cyc12min. > Anyway, the problem is resolved now. I delete my jop [/q] directory [q]> and [q] > retrieved everything again. That has solved the problem. > > In the java file com.jopdesign.build.JOPizer.java, what [/q] is the [q]> use of [q] > import com.sun.corba.se.ActivationIDL.Repository; > I don't have that class, and does not look like is needed [/q] for [q]> compilation. [q] > > ----- Original Message ----- > From: Martin Schoeberl<martin at j...> > To: > Date: Tue Dec 13 11:06:11 CET 2005 > Subject: [oc] Problem Compiling JOP with Quartus 5.1 > [q]>> Which project are you compiling? Did you check out [/q] the [q]> project [q]>> in the last days? I've changed JOP to use the new [/q] SimpCon [q]> interface [q]>> to IO devices and the main memory. I've probably not [/q] > updated each [q]>> project up to now. However, cycmin and cyc12min [/q] should [q]> work [q]>> out-of-the-box. You can also try to use the Makefile. >> Martin >> ----- Original Message ----- >> From: <pratip.mukherjee at fmr.com> >> To: <cores at opencores.org> >> Sent: Monday, December 12, 2005 7:38 PM >> Subject: [oc] Problem Compiling JOP with Quartus 5.1 [q]> > While compiling JOP processor [/q] (www.jopdesign.com) [q]> with Quatus [q]>> 5.1 [q]> > Web Edition, I am getting a ridiculously low LE [/q] count [q]> of [q]>> around 60. [q]> > There is no error in compilation, but tons of [/q] warning [q]> about [q]>> stuck data, [q]> > clock etc., but I can't see anything wrong with [/q] the [q]> code. In [q]>> past, I [q]> > have compiled JOP with Quartus 4.2 without any [/q] > problem. [q]>> Anybody has [q]> > any idea what could be wrong? > > Thanks. > > > > -- Pratip > > _______________________________________________ > > <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A> [/q] >> >> [/q] > _______________________________________________ > <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A> [/q] > > [/q] [/q] _______________________________________________ <A HREF="http://www.opencores.org/mailman/listinfo/cores">http://www.opencores.org/mailman/listinfo/cores</A>[/q] There are small microcode test programms to test the serial line and the memory interface. You can find the description in: http://www.jopdesign.com/doc/build.pdf Seciton 7 Martin ----- Original Message ----- From: ashutosh_banerji at hotmail.com> To: cores at opencores.org> Sent: Sunday, June 18, 2006 2:19 PM Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 U r on the right track but need to focus and concentrate so the stupid error messages dont come. Good luck and happy hunting Gopal Da ----- Original Message ----- From: pratip.mukherjee at fmr.compratip.mukherjee at f...> To: Date: Tue Dec 20 18:30:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 Everything builds fine now but while downloading thru serial line, I am getting data errors. I enabled the traces in down.exe to print the bytes send and received, and this is a portion of what I am seeing: E:\Designs\jop\java\target>..\..\down -e dist\bin\test_Hello.jop COM1 2505 words of Java bytecode (9 KB) 0-0 0-0 17-16 132-128 0-0 0-0 9-12 202-239 42-14 183-146 0-0 1-0 42-14 18-18 2-2 180-156 0-0 3-2 181-156 0-0 3-2 177-144 0-0 0-0 42- 14 183-146 0-0 1-0 42-14 43-14 180-144 0-0 3-2 181-144 0-0 3-3 177- 144 0-0 0-0 0-0 42-15 183-146 0-0 1-0 At first I thought there is a Baudrate mismatch, so modified down.exe and the VHDL to operate at 9600. That did not help and produced the same byte patterns as above. Tonight, I'll use SignalTap and try to find out what is going on. Does anyone have any other idea I should try out first? ----- Original Message ----- From: Martin Schoeberl To: Date: Fri Dec 16 12:01:27 CET 2005 Subject: [oc] Problem Compiling JOP with Quartus 5.1 > Fine to hear that it works now for you. > > About the import in JOPizer: This was a mistake that happend > perhaps during typing in Eclipse, sorry. > I've updated the CVS with a JOPizer version where this import > statement is removed. > Martin > ----- Original Message ----- > From: > To: > Sent: Thursday, December 15, 2005 6:11 PM > Subject: Re: [oc] Problem Compiling JOP with Quartus 5.1 >I was having problem with both cycmin and cyc12min. > Anyway, the problem is resolved now. I delete my jop directory > and > retrieved everything again. That has solved the problem. > > In the java file com.jopdesign.build.JOPizer.java, what is the > use of > import com.sun.corba.se.ActivationIDL.Repository; > I don't have that class, and does not look like is needed for > compilation. > > ----- Original Message ----- > From: Martin Schoeberl > To: > Date: Tue Dec 13 11:06:11 CET 2005 > Subject: [oc] Problem Compiling JOP with Quartus 5.1 > >> Which project are you compiling? Did you check out the > project >> in the last days? I've changed JOP to use the new SimpCon > interface >> to IO devices and the main memory. I've probably not > updated each >> project up to now. However, cycmin and cyc12min should > work >> out-of-the-box. You can also try to use the Makefile. >> Martin >> ----- Original Message ----- >> From: >> To: >> Sent: Monday, December 12, 2005 7:38 PM >> Subject: [oc] Problem Compiling JOP with Quartus 5.1 > > While compiling JOP processor (www.jopdesign.com) > with Quatus >> 5.1 > > Web Edition, I am getting a ridiculously low LE count > of >> around 60. > > There is no error in compilation, but tons of warning > about >> stuck data, > > clock etc., but I can't see anything wrong with the > code. In >> past, I > > have compiled JOP with Quartus 4.2 without any > problem. >> Anybody has > > any idea what could be wrong? > > Thanks. > > > > -- Pratip > > _______________________________________________ > > http://www.opencores.org/mailman/listinfo/cores >> >> > _______________________________________________ > http://www.opencores.org/mailman/listinfo/cores > > _______________________________________________ http://www.opencores.org/mailman/listinfo/cores

no use

no use

1/1

no use

no use

© copyright 1999-2026 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.