1/1 
|
The CPU list
by Unknown on Oct 18, 2006 |
Not available! | ||
|
No special submission.
However project maintainer needs to set properties for his/her project. This
is done by logging into the opencores web site with his/her username and
going to project's administration page. For example for openrisc this is at
http://www.opencores.org/projectadmin.cgi/properties/or1k. For other
projects:
http://www.opencores.org/projectadmin.cgi/properties/project_name
Then move the appropriate properties from "All properties" to "Project
properties". For example for project to be listed under Microprocessor
section on the Projects page, the property Category::Microprocessor has to
be set for the project. Also other properties needs to be set, such as
Language, Development status, Wishbone compliant, License etc. Just pick the
right properties from the "All properties" section and assign them to your
project.
regards
Damjan
----- Original Message -----
From: samiam at moorecad.com>
To: cores at opencores.org>
Sent: Wednesday, October 18, 2006 10:49 PM
Subject: [oc] The CPU list
How do things get on the "projects" page? Is there some special submission
procedure that needs to be done?
Thanks,
Scott
_______________________________________________
http://www.opencores.org/mailman/listinfo/cores
|
|||
|
The CPU list
by samiam on Oct 18, 2006 |
samiam
Posts: 7 Joined: Sep 10, 2010 Last seen: Sep 16, 2010 |
||
|
How do things get on the "projects" page? Is there some special submission
procedure that needs to be done? Thanks, Scott |
|||
|
The CPU list
by kboyette on Oct 18, 2006 |
kboyette
Posts: 1 Joined: Aug 28, 2006 Last seen: Jan 30, 2014 |
||
|
----- Original Message -----
From: samiam at moorecad.comsamiam at m...>
To:
Date: Wed Oct 18 22:49:19 CEST 2006
Subject: [oc] The CPU list
How do things get on the "projects" page? Is there some
special submission procedure that needs to be done? Thanks, Scott Scott, When you are logged in you should be able to edit all of your project features. Make sure you select: "ADMIN::properties" at the top bar and set the appropriate project attributes. Submit your changes. It might take a little time to show up on the system. |
|||
|
The CPU list
by samiam on Oct 19, 2006 |
samiam
Posts: 7 Joined: Sep 10, 2010 Last seen: Sep 16, 2010 |
||
|
Thank you all for the replies.
----- Original Message -----
From: kboyette at critia.comkboyette at c...>
To:
Date: Wed Oct 18 23:07:17 CEST 2006
Subject: [oc] The CPU list
----- Original Message -----
From: samiam at moorecad.com
To:
Date: Wed Oct 18 22:49:19 CEST 2006
Subject: [oc] The CPU list
> How do things get on the "projects" page? Is there
some
> special submission
> procedure that needs to be done? > Thanks, > Scott > > Scott, When you are logged in you should be able to edit all of your project features. Make sure you select: "ADMIN::properties" at the top bar and set the appropriate project attributes. Submit your changes. It might take a little time to show up on the system. |
|||
|
The CPU list
by samiam on Oct 26, 2006 |
samiam
Posts: 7 Joined: Sep 10, 2010 Last seen: Sep 16, 2010 |
||
|
Hi,
I don't see the license status in the "all properties list",
it lists GPL and LGPL, but not BSD?
Scott
----- Original Message -----
From: Damjan Lampretdamjanl at o...>
To:
Date: Wed Oct 18 20:07:06 CEST 2006
Subject: [oc] The CPU list
No special submission.
However project maintainer needs to set properties for his/her
project. This
is done by logging into the opencores web site with his/her
username and
going to project's administration page. For example for openrisc
this is at
http://www.opencores.org/projectadmin.cgi/properties/or1k. For
other
projects:
http://www.opencores.org/projectadmin.cgi/properties/project_name
Then move the appropriate properties from "All
properties" to "Project
properties". For example for project to be listed under
Microprocessor
section on the Projects page, the property Category::Microprocessor
has to
be set for the project. Also other properties needs to be set, such
as
Language, Development status, Wishbone compliant, License etc. Just
pick the
right properties from the "All properties" section and
assign them to your
project.
regards
Damjan
----- Original Message -----
From:
To:
Sent: Wednesday, October 18, 2006 10:49 PM
Subject: [oc] The CPU list
> How do things get on the "projects" page? Is there
some special submission
> procedure that needs to be done?
>
> Thanks,
>
> Scott
> _______________________________________________
> http://www.opencores.org/mailman/listinfo/cores
|
|||
1/1