1/1 
|
Invalid CRC
by Unknown on Dec 10, 2004 |
Not available! | ||
|
Hi all,
We have synthesised and programmed our FPGA with or1200 (w/ Debug Module) and the TAP. Have hooked up our JTAG cable and it seems to be working correctly. (We can check the ID of the TAP). We are trying to run ./jp1-xilinx 9999 and all we get is Invalid CRC Invalid CRC Invalid CRC Invalid CRC etc..... Has anyone had this problem before? Any hints or tips appreciated. regards, Luke |
|||
|
Invalid CRC
by DannyBaumann on Dec 10, 2004 |
DannyBaumann
Posts: 4 Joined: Sep 30, 2004 Last seen: Feb 24, 2009 |
||
|
Hi,
when using the debug module with the separate TAP module, you have to use jp2-xilinx. Use jp1-xilinx only when instantiating the old debug module with integrated TAP module. Regards, Danny Luke Darnell schrieb:
Hi all,
We have synthesised and programmed our FPGA with or1200 (w/ Debug
Module) and the TAP.
Have hooked up our JTAG cable and it seems to be working correctly. (We
can check the ID of the TAP).
We are trying to run
./jp1-xilinx 9999
and all we get is
Invalid CRC
Invalid CRC
Invalid CRC
Invalid CRC
etc.....
Has anyone had this problem before?
Any hints or tips appreciated.
regards,
Luke
_______________________________________________
http://www.opencores.org/mailman/listinfo/openrisc
|
|||
1/1