1/1 
|
problems with building or32-uclinux-gcc
by Unknown on Mar 6, 2005 |
Not available! | ||
|
hi,
I have tried building openrisc's toolchain right after installing Redhat Linux 7.2 on my pc. Everything is fine when I build the binutils, but I am now stuck in the step of building or32-uclinux-gcc. Error message goes like this: " ..... HEADERS="ansidecl.h dbxelf.h elfos.h or32/or32.h or32/elf.h or32/linux-gas.h or32/linux-elf.h defaults.h" DEFINES=""\ TARGET_CPU_DEFAULT=""\ /bin/sh ../../gcc-3.2.3/gcc/mkconfig.sh tconfig.h make[1]: *** NO rule to make target '../../gcc-3.2.3/gcc/config/or32/or32.S', needed by 'libgcc.a'. Stop." Here is the configuration of my building enviornment gcc 2.96 (the default version of RH7.2) autoconf 2.13 automake 1.4-p6 bison 1.35 flex 2.5.4 I guess this is the standard given in the guide by Robert Cragie except for a gcc of 2.96 version but some former posts here state that toolchain building goes all right with gcc 2.96 so I guess that's not the point,right? So could anyone here give me some suggestions? |
|||
|
problems with building or32-uclinux-gcc
by Unknown on Mar 10, 2005 |
Not available! | ||
|
Did you remember to include the binutils binaries you built in your path? I
remember seeing something like this if you don't do that.
Robert Cragie, Design Engineer
_______________________________________________________________
Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK
http://www.jennic.com Tel: +44 (0) 114 281 2655
_______________________________________________________________
-----Original Message-----
From: openrisc-bounces@opencores.org
[mailto:openrisc-bounces@opencores.org]On Behalf Of andyquan@sjtu.edu.cn
Sent: 06 March 2005 10:51
To: openrisc@opencores.org
Subject: [openrisc] problems with building or32-uclinux-gcc
hi,
I have tried building openrisc's toolchain right after installing
Redhat Linux 7.2 on my pc. Everything is fine when I build the
binutils, but I am now stuck in the step of building or32-uclinux-gcc.
Error message goes like this:
"
.....
HEADERS="ansidecl.h dbxelf.h elfos.h or32/or32.h or32/elf.h
or32/linux-gas.h or32/linux-elf.h defaults.h" DEFINES=""\
TARGET_CPU_DEFAULT=""\
/bin/sh ../../gcc-3.2.3/gcc/mkconfig.sh tconfig.h
make[1]: *** NO rule to make target
'../../gcc-3.2.3/gcc/config/or32/or32.S', needed by 'libgcc.a'. Stop."
Here is the configuration of my building enviornment
gcc 2.96 (the default version of RH7.2)
autoconf 2.13
automake 1.4-p6
bison 1.35
flex 2.5.4
I guess this is the standard given in the guide by Robert Cragie
except for a gcc of 2.96 version but some former posts here state that
toolchain building goes all right with gcc 2.96 so I guess that's not
the point,right?
So could anyone here give me some suggestions?
_______________________________________________
http://www.opencores.org/mailman/listinfo/openrisc
|
|||
|
problems with building or32-uclinux-gcc
by Unknown on Mar 11, 2005 |
Not available! | ||
|
In my case, I recomend Redhat9.0.
I tested and checked that there is no problem when install
openrisc toolchain.
On Sun, 6 Mar 2005 11:50:58 +0100, andyquan@sjtu.edu.cn
andyquan@sjtu.edu.cn> wrote:
hi,
I have tried building openrisc's toolchain right after installing
Redhat Linux 7.2 on my pc. Everything is fine when I build the
binutils, but I am now stuck in the step of building or32-uclinux-gcc.
Error message goes like this:
"
.....
HEADERS="ansidecl.h dbxelf.h elfos.h or32/or32.h or32/elf.h
or32/linux-gas.h or32/linux-elf.h defaults.h" DEFINES=""\
TARGET_CPU_DEFAULT=""\
/bin/sh ../../gcc-3.2.3/gcc/mkconfig.sh tconfig.h
make[1]: *** NO rule to make target
'../../gcc-3.2.3/gcc/config/or32/or32.S', needed by 'libgcc.a'. Stop."
Here is the configuration of my building enviornment
gcc 2.96 (the default version of RH7.2)
autoconf 2.13
automake 1.4-p6
bison 1.35
flex 2.5.4
I guess this is the standard given in the guide by Robert Cragie
except for a gcc of 2.96 version but some former posts here state that
toolchain building goes all right with gcc 2.96 so I guess that's not
the point,right?
So could anyone here give me some suggestions?
_______________________________________________
http://www.opencores.org/mailman/listinfo/openrisc
|
|||
|
problems with building or32-uclinux-gcc
by Unknown on Mar 12, 2005 |
Not available! | ||
|
Yes. I am sure I have included binutils in my path.
And I have done the same thing in cygwin with gcc-2.95 and it turns
out to be fine. So I am a little bit confused. Any more suggestion about
the causes of the error?
best regards
----- Original Message -----
From: Robert Cragiercc@j...>
To:
Date: Thu Mar 10 12:07:51 CET 2005
Subject: [openrisc] problems with building or32-uclinux-gcc
Did you remember to include the binutils binaries you built in your
path? I remember seeing something like this if you don't do that. Robert Cragie, Design Engineer _____________________________________________________________ __
Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK
http://www.jennic.com Tel: +44 (0) 114 281 2655
_____________________________________________________________ __
> -----Original Message-----
> From: openrisc-bounces@o...
> [mailto:openrisc-bounces@o...]On Behalf Of
andyquan@s...
> Sent: 06 March 2005 10:51
> To: openrisc@o...
> Subject: [openrisc] problems with building or32-uclinux-gcc
>
>
> hi,
>
> I have tried building openrisc's toolchain right after
installing
> Redhat Linux 7.2 on my pc. Everything is fine when I build the
> binutils, but I am now stuck in the step of building or32-uclinux-gcc.
> Error message goes like this:
> > " > ..... > HEADERS="ansidecl.h dbxelf.h elfos.h or32/or32.h or32/elf.h
> or32/linux-gas.h or32/linux-elf.h defaults.h"
DEFINES=""\
> TARGET_CPU_DEFAULT=""\
> /bin/sh ../../gcc-3.2.3/gcc/mkconfig.sh tconfig.h > make[1]: *** NO rule to make target > '../../gcc-3.2.3/gcc/config/or32/or32.S', needed by 'libgcc.a'. Stop."
>
> Here is the configuration of my building enviornment > > gcc 2.96 (the default version of RH7.2) > autoconf 2.13 > automake 1.4-p6 > bison 1.35 > flex 2.5.4 > > I guess this is the standard given in the guide by Robert Cragie
> except for a gcc of 2.96 version but some former posts here
state that
> toolchain building goes all right with gcc 2.96 so I guess
that's not
> the point,right?
>
> So could anyone here give me some suggestions?
> _______________________________________________
> http://www.opencores.org/mailman/listinfo/openrisc
>
|
|||
|
problems with building or32-uclinux-gcc
by Unknown on Mar 12, 2005 |
Not available! | ||
|
* andyquan@sjtu.edu.cn (andyquan@sjtu.edu.cn) wrote:
Yes. I am sure I have included binutils in my path.
And I have done the same thing in cygwin with gcc-2.95 and it turns out to be fine. So I am a little bit confused. Any more suggestion about the causes of the error? Usually i suggest just running the ats script. Can you do that to ensure there ins't any mismatch in build process.. best regards, p.
best regards
----- Original Message -----
From: Robert Cragiercc@j...>
To:
Date: Thu Mar 10 12:07:51 CET 2005
Subject: [openrisc] problems with building or32-uclinux-gcc
_______________________________________________
http://www.opencores.org/mailman/listinfo/openrisc
> Did you remember to include the binutils binaries you built in your
> path? I > remember seeing something like this if you don't do that. > Robert Cragie, Design Engineer > _____________________________________________________________ __
> Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK
> http://www.jennic.com Tel: +44 (0) 114 281 2655
>
_____________________________________________________________ __
> -----Original Message-----
> From: openrisc-bounces@o...
> [mailto:openrisc-bounces@o...]On Behalf Of
> andyquan@s...
> Sent: 06 March 2005 10:51
> To: openrisc@o...
> Subject: [openrisc] problems with building or32-uclinux-gcc
>
>
> hi,
>
> I have tried building openrisc's toolchain right after
> installing
> Redhat Linux 7.2 on my pc. Everything is fine when I build the
> binutils, but I am now stuck in the step of building > or32-uclinux-gcc.
> Error message goes like this:
> > " > ..... > HEADERS="ansidecl.h dbxelf.h elfos.h or32/or32.h > or32/elf.h
> or32/linux-gas.h or32/linux-elf.h defaults.h"
> DEFINES=""\
> TARGET_CPU_DEFAULT=""\
> /bin/sh ../../gcc-3.2.3/gcc/mkconfig.sh tconfig.h > make[1]: *** NO rule to make target > '../../gcc-3.2.3/gcc/config/or32/or32.S', needed by > 'libgcc.a'. Stop."
>
> Here is the configuration of my building enviornment > > gcc 2.96 (the default version of RH7.2) > autoconf 2.13 > automake 1.4-p6 > bison 1.35 > flex 2.5.4 > > I guess this is the standard given in the guide by Robert > Cragie
> except for a gcc of 2.96 version but some former posts here
> state that
> toolchain building goes all right with gcc 2.96 so I guess
> that's not
> the point,right?
>
> So could anyone here give me some suggestions?
> _______________________________________________
> http://www.opencores.org/mailman/listinfo/openrisc
>
> > |
|||
|
problems with building or32-uclinux-gcc
by Unknown on Mar 13, 2005 |
Not available! | ||
|
Make sure the binutils binaries you build comes before anything else in
the path. Also, as Matjaz suggests, look at the ATS scripts as well.
Robert
andyquan@sjtu.edu.cn wrote:
Yes. I am sure I have included binutils in my path.
And I have done the same thing in cygwin with gcc-2.95 and it turns
out to be fine. So I am a little bit confused. Any more suggestion about
the causes of the error?
best regards
----- Original Message -----
From: Robert Cragiercc@j...>
To:
Date: Thu Mar 10 12:07:51 CET 2005
Subject: [openrisc] problems with building or32-uclinux-gcc
_______________________________________________
http://www.opencores.org/mailman/listinfo/openrisc
Did you remember to include the binutils binaries you built in your
path? I remember seeing something like this if you don't do that. Robert Cragie, Design Engineer _____________________________________________________________ __
Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK
http://www.jennic.com Tel: +44 (0) 114 281 2655
_____________________________________________________________ __
-----Original Message-----
From: openrisc-bounces@o...
[mailto:openrisc-bounces@o...]On Behalf Of
andyquan@s...
Sent: 06 March 2005 10:51
To: openrisc@o...
Subject: [openrisc] problems with building or32-uclinux-gcc
hi,
I have tried building openrisc's toolchain right after
installing
Redhat Linux 7.2 on my pc. Everything is fine when I build the
binutils, but I am now stuck in the step of building or32-uclinux-gcc.
Error message goes like this:
" ..... HEADERS="ansidecl.h dbxelf.h elfos.h or32/or32.h or32/elf.h
or32/linux-gas.h or32/linux-elf.h defaults.h"
DEFINES=""\
TARGET_CPU_DEFAULT=""\
/bin/sh ../../gcc-3.2.3/gcc/mkconfig.sh tconfig.h make[1]: *** NO rule to make target '../../gcc-3.2.3/gcc/config/or32/or32.S', needed by 'libgcc.a'. Stop."
Here is the configuration of my building enviornment
gcc 2.96 (the default version of RH7.2) autoconf 2.13 automake 1.4-p6 bison 1.35 flex 2.5.4 I guess this is the standard given in the guide by Robert Cragie
except for a gcc of 2.96 version but some former posts here
state that
toolchain building goes all right with gcc 2.96 so I guess
that's not
the point,right?
So could anyone here give me some suggestions?
_______________________________________________
http://www.opencores.org/mailman/listinfo/openrisc
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.1 - Release Date: 09/03/2005 |
|||
1/1