This is a set of diff does the following: 1 Upgrade autoconf automake autoheader files, (configure.diff is a big file ) 2 Change the target binary from sim to or1ksim to avoid name collision and to give the binary a more suitable name. 3. sim.cfg was changed to or1ksim.cfg for the same reason as 2 4. or1ksim searches for or1ksim.cfg at current directory ${HOME}/.or1k/or1ksim.cfg and ${PREFIX}/etc directory. ${PREFIX}/etc directory was added to make or1ksim run with real default configuration file after installation and for system wide configuration . 5 target_cpu=or32 was changed to SIM_ARCH=or32 because of name collision with autoconf system. 6 or32 is the default SIM_ARCH, so ./configure works without specifying the SIM_ARCH=or32 7 acconfig.h was deleted its content is in config.h.in there is also a need to remove cuc/Makefile from cvs sources. Nir Mor -------------- next part -------------- --- toplevel.c.orig 2005-02-18 23:04:29.000000000 +0200 +++ toplevel.c 2005-03-10 23:40:58.000000000 +0200 @@ -354,7 +354,7 @@ PRINTF(" -i enable interactive command prompt\n"); PRINTF(" --nosrv do not launch JTAG proxy server\n"); /* (CZ) */ PRINTF(" --srv launch JTAG proxy server on port ; [random]\n"); /* (CZ) */ - PRINTF(" -f or --file load script file [sim.cfg]\n"); + PRINTF(" -f or --file load script file [or1ksim.cfg]\n"); PRINTF(" --enable-profile enable profiling.\n"); PRINTF(" --enable-mprofile enable memory profiling.\n"); PRINTF(" --output-cfg prints C structure of current\n"); @@ -368,7 +368,7 @@ /* Read configuration file. */ if (!runtime.sim.script_file_specified) - read_script_file ("sim.cfg"); + read_script_file ("or1ksim.cfg"); /* Overide parameters with command line ones */ if (runtime.simcmd.profile) config.sim.profile = 1; -------------- next part -------------- --- sim-config.c.orig 2005-02-18 23:04:29.000000000 +0200 +++ sim-config.c 2005-03-10 23:40:58.000000000 +0200 @@ -577,6 +577,16 @@ return x == 1; } +int log2 (int x) { + int log=-1; + while (x) + { + x >>= 1; + log++; + } + return log; +} + void reg_config_secs(void) { reg_config_param(reg_config_sec("base", NULL, NULL), "include", paramt_str, @@ -718,16 +728,19 @@ { FILE *f; char *home = getenv("HOME"); - char ctmp[STR_SIZE]; - int local = 1; + char ctmp1[STR_SIZE]; + char ctmp2[STR_SIZE]; + char * openfile; cur_section = NULL; - sprintf(ctmp, "%s/.or1k/%s", home, filename); - if ((f = fopen (filename, "rt")) != NULL - || home != NULL && !(local = 0) && (f = fopen (ctmp, "rt")) != NULL) { + sprintf(ctmp1, "%s/.or1ksim/%s", home, filename); + sprintf(ctmp2, "%s/%s", SYSCONFDIR , filename); + if ((((f = fopen (filename, "rt")) != NULL) && (openfile = filename)) + || ((home != NULL) && ((f = fopen (ctmp1, "rt")) != NULL) && (openfile = ctmp1)) + || (((f = fopen (ctmp2, "rt")) != NULL) && (openfile = ctmp2))) { if (config.sim.verbose && !runtime.sim.output_cfg) - PRINTF ("Reading script file from '%s'...\n", local ? filename : ctmp); - strcpy (runtime.sim.script_fn, local ? filename : ctmp); + PRINTF ("Reading script file from '%s'...\n", openfile ); + strcpy (runtime.sim.script_fn, openfile); while (!feof(f)) { char param[STR_SIZE]; @@ -737,7 +750,7 @@ struct config_section *cur; cur_section = NULL; if (fscanf (f, "%s\n", param) != 1) { - fprintf (stderr, "%s: ERROR: Section name required.\n", local ? filename : ctmp); + fprintf (stderr, "%s: ERROR: Section name required.\n", openfile); exit (1); } for (cur = sections; cur; cur = cur->next) @@ -764,7 +777,7 @@ c0 = c1; c1 = fgetc(f); if (feof(f)) { - fprintf (stderr, "%s: ERROR: Comment reached EOF.\n", local ? filename : ctmp); + fprintf (stderr, "%s: ERROR: Comment reached EOF.\n", openfile ); exit (1); } } @@ -798,7 +811,7 @@ runtime.sim.script_file_specified = 1; } else if (config.sim.verbose) - fprintf (stderr, "WARNING: Cannot read script file from '%s',\nneither '%s'.\n", filename, ctmp); + fprintf (stderr, "WARNING: Cannot read script file from:\n'%s' or\n'%s' or\n'%s'\n", filename, ctmp1, ctmp2); } /* Utility for execution of set sim command. */ -------------- next part -------------- --- sim-cmd.c.orig 2005-02-18 23:04:29.000000000 +0200 +++ sim-cmd.c 2005-03-10 23:40:58.000000000 +0200 @@ -134,7 +134,7 @@ PRINTF("dv [] [] - dumps memory as verilog (use redirect)\n"); PRINTF("dh [] - dumps memory as hex code (use redirect)\n"); PRINTF(" > - redirect simulator stdout to (and not emulated PRINTF)\n"); - PRINTF("set = - set configuration. See sim.cfg for more information.\n"); + PRINTF("set = - set configuration. See or1ksim.cfg for more information.\n"); PRINTF("debug - toggles simulator debug mode\n"); mp_help (); prof_help (); -------------- next part -------------- --- configure.in.orig 2005-02-18 23:04:29.000000000 +0200 +++ configure.in 2005-03-10 23:40:58.000000000 +0200 @@ -14,15 +14,20 @@ SIMVERSION=1.2 dnl make sure we are using a recent autoconf version -AC_PREREQ(2.10) -AC_CANONICAL_HOST +AC_PREREQ(2.59) +AC_ARG_VAR(SIM_ARCH, Simulate architecture or32 or dlx default is or32) + +test -z "$SIM_ARCH" && SIM_ARCH=or32 + dnl yuck -case "$target_cpu" in +case "$SIM_ARCH" in or32*) CPU_ARCH=or32; - ARCH_ISA=OR32;; + ARCH_ISA=OR32; + ;; dlx*) CPU_ARCH=dlx; - ARCH_ISA=DLX;; + ARCH_ISA=DLX; + ;; esac AC_SUBST(CPU_ARCH) -------------- next part -------------- --- configure.orig 2005-02-25 13:56:43.000000000 +0200 +++ configure 2005-03-10 23:40:58.000000000 +0200 @@ -1,13 +1,82 @@ #! /bin/sh -# From configure.in for or1ksim-1.2, version 2.14, from autoconf version 2.52. +# From configure.in for or1ksim-1.2, version 2.14, from autoconf version AC_ACVERSION. # Guess values for system-dependent variables and create Makefiles. -# Generated by Autoconf 2.52. +# Generated by GNU Autoconf 2.59. # -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. +# Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' @@ -15,22 +84,113 @@ as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' $as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} -# Name of the executable. -as_me=`echo "$0" |sed 's,.*[\\/],,'` + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr @@ -56,24 +216,21 @@ fi rm -f conf$$ conf$$.exe conf$$.file -as_executable_p="test -f" - -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: else - as_unset=false + test -d ./-p && rmdir ./-p + as_mkdir_p=false fi -# NLS nuisances. -$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; } -$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; } -$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; } -$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; } -$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; } -$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; } -$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; } -$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; } +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + # IFS # We need space, tab and new line, in precisely that order. @@ -82,7 +239,8 @@ IFS=" $as_nl" # CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; } +$as_unset CDPATH + # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, @@ -95,9 +253,11 @@ # Initializations. # ac_default_prefix=/usr/local +ac_config_libobj_dir=. cross_compiling=no subdirs= -MFLAGS= MAKEFLAGS= +MFLAGS= +MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. @@ -105,6 +265,13 @@ # only ac_max_sed_lines should be used. : ${ac_max_here_lines=38} +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + ac_unique_file="cpu/or32/execute.c" # Factoring default headers for most tests. ac_includes_default="\ @@ -143,6 +310,9 @@ # include #endif" +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar SIM_ARCH CPU_ARCH CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP AR RANLIB ac_ct_RANLIB MAKE_SHELL SIMPLE_EXECUTION_TRUE SIMPLE_EXECUTION_FALSE BUILD_DIR LOCAL_CFLAGS LOCAL_DEFS ARFLAGS SUMVERSION TERMCAP_LIB INCLUDES LIBOBJS LTLIBOBJS' +ac_subst_files='' + # Initialize some variables set by options. ac_init_help= ac_init_version=false @@ -181,13 +351,6 @@ infodir='${prefix}/info' mandir='${prefix}/man' -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= - ac_prev= for ac_option do @@ -320,7 +483,7 @@ with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) + | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ @@ -499,30 +662,31 @@ eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2 + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir + localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2 + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. +# FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias -# FIXME: should be removed in autoconf 3.0. +# FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe @@ -538,13 +702,23 @@ test "$silent" = yes && exec 6>/dev/null + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. @@ -554,13 +728,16 @@ fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2 + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 { (exit 1); exit 1; }; } else - { echo "$as_me: error: cannot find sources in $srcdir" >&2 + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias @@ -574,6 +751,10 @@ ac_env_target_alias_value=$target_alias ac_cv_env_target_alias_set=${target_alias+set} ac_cv_env_target_alias_value=$target_alias +ac_env_SIM_ARCH_set=${SIM_ARCH+set} +ac_env_SIM_ARCH_value=$SIM_ARCH +ac_cv_env_SIM_ARCH_set=${SIM_ARCH+set} +ac_cv_env_SIM_ARCH_value=$SIM_ARCH ac_env_CC_set=${CC+set} ac_env_CC_value=$CC ac_cv_env_CC_set=${CC+set} @@ -601,7 +782,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. - cat if you have libraries in a @@ -698,40 +880,93 @@ Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. -EOF +_ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` - for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue - cd $ac_subdir - # A "../" for each directory in /$ac_subdir. - ac_dots=`echo $ac_subdir | - sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'` - - case $srcdir in - .) # No --srcdir option. We are building in place. - ac_sub_srcdir=$srcdir ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_sub_srcdir=$srcdir/$ac_subdir ;; - *) # Relative path. - ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;; - esac + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_sub_srcdir/configure.gnu; then + if test -f $ac_srcdir/configure.gnu; then echo - $SHELL $ac_sub_srcdir/configure.gnu --help=recursive - elif test -f $ac_sub_srcdir/configure; then + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then echo - $SHELL $ac_sub_srcdir/configure --help=recursive - elif test -f $ac_sub_srcdir/configure.ac || - test -f $ac_sub_srcdir/configure.in; then + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then echo $ac_configure --help else - echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2 + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi cd $ac_popdir done @@ -739,31 +974,30 @@ test -n "$ac_init_help" && exit 0 if $ac_init_version; then - cat config.log -cat >&5 &5 /dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` @@ -782,79 +1016,156 @@ /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -PATH = $PATH - _ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + } >&5 -cat >&5 &5 \?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - ac_sep=" " ;; - *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg" - ac_sep=" " ;; - esac - # Get rid of the leading space. + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. trap 'exit_status=$? # Save into config.log some information that might help in debugging. - echo >&5 - echo "## ----------------- ##" >&5 - echo "## Cache variables. ##" >&5 - echo "## ----------------- ##" >&5 - echo >&5 - # The following way of writing the cache mishandles newlines in values, + { + echo + + cat &1 | case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; -} >&5 - sed "/^$/d" confdefs.h >conftest.log - if test -s conftest.log; then - echo >&5 - echo "## ------------ ##" >&5 - echo "## confdefs.h. ##" >&5 - echo "## ------------ ##" >&5 - echo >&5 - cat conftest.log >&5 - fi - (echo; echo) >&5 - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" >&5 - echo "$as_me: exit $exit_status" >&5 - rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files && +} + echo + + cat &5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do @@ -867,6 +1178,33 @@ # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo >confdefs.h +# Predefined preprocessor variables. + +cat >>confdefs.h >confdefs.h >confdefs.h >confdefs.h >confdefs.h &5 + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} - cat "$ac_site_file" >&5 + sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done @@ -889,7 +1227,7 @@ # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then - { echo "$as_me:892: loading cache $cache_file" >&5 + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . $cache_file;; @@ -897,7 +1235,7 @@ esac fi else - { echo "$as_me:900: creating cache $cache_file" >&5 + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi @@ -906,49 +1244,49 @@ # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" eval ac_new_val="\$ac_env_${ac_var}_value" case $ac_old_set,$ac_new_set in set,) - { echo "$as_me:916: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { echo "$as_me:920: error: \`$ac_var' was not set in the previous run" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:926: error: \`$ac_var' has changed since the previous run:" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:928: former value: $ac_old_val" >&5 + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:930: current value: $ac_new_val" >&5 + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + ac_cache_corrupted=: fi;; esac - # Pass precious variables to config.status. It doesn't matter if - # we pass some twice (in addition to the command line arguments). + # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` - ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - *) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val" - ;; + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { echo "$as_me:949: error: changes in the environment can compromise the build" >&5 + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:951: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi @@ -959,26 +1297,23 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac -echo "#! $SHELL" >conftest.sh -echo "exit 0" >>conftest.sh -chmod +x conftest.sh -if { (echo "$as_me:971: PATH=\".;.\"; conftest.sh") >&5 - (PATH=".;."; conftest.sh) 2>&5 - ac_status=$? - echo "$as_me:974: \$? = $ac_status" >&5 - (exit $ac_status); }; then - ac_path_separator=';' -else - ac_path_separator=: -fi -PATH_SEPARATOR="$ac_path_separator" -rm -f conftest.sh + + + + + + + + + + + + + + + + + ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do @@ -997,7 +1332,7 @@ fi done if test -z "$ac_aux_dir"; then - { { echo "$as_me:1000: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} { (exit 1); exit 1; }; } fi @@ -1007,11 +1342,11 @@ # Make sure we can run config.sub. $ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:1010: error: cannot run $ac_config_sub" >&5 + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 echo "$as_me: error: cannot run $ac_config_sub" >&2;} { (exit 1); exit 1; }; } -echo "$as_me:1014: checking build system type" >&5 +echo "$as_me:$LINENO: checking build system type" >&5 echo $ECHO_N "checking build system type... $ECHO_C" >&6 if test "${ac_cv_build+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1020,23 +1355,24 @@ test -z "$ac_cv_build_alias" && ac_cv_build_alias=`$ac_config_guess` test -z "$ac_cv_build_alias" && - { { echo "$as_me:1023: error: cannot guess build type; you must specify one" >&5 + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:1027: error: $ac_config_sub $ac_cv_build_alias failed." >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed." >&2;} + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:1032: result: $ac_cv_build" >&5 +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 echo "${ECHO_T}$ac_cv_build" >&6 build=$ac_cv_build build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$as_me:1039: checking host system type" >&5 + +echo "$as_me:$LINENO: checking host system type" >&5 echo $ECHO_N "checking host system type... $ECHO_C" >&6 if test "${ac_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1045,19 +1381,20 @@ test -z "$ac_cv_host_alias" && ac_cv_host_alias=$ac_cv_build_alias ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:1048: error: $ac_config_sub $ac_cv_host_alias failed" >&5 + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:1053: result: $ac_cv_host" >&5 +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 echo "${ECHO_T}$ac_cv_host" >&6 host=$ac_cv_host host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$as_me:1060: checking target system type" >&5 + +echo "$as_me:$LINENO: checking target system type" >&5 echo $ECHO_N "checking target system type... $ECHO_C" >&6 if test "${ac_cv_target+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1066,25 +1403,26 @@ test "x$ac_cv_target_alias" = "x" && ac_cv_target_alias=$ac_cv_host_alias ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || - { { echo "$as_me:1069: error: $ac_config_sub $ac_cv_target_alias failed" >&5 + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:1074: result: $ac_cv_target" >&5 +echo "$as_me:$LINENO: result: $ac_cv_target" >&5 echo "${ECHO_T}$ac_cv_target" >&6 target=$ac_cv_target target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + # The aliases save the names the user supplied, while $host etc. # will get canonicalized. test -n "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- -am__api_version="1.6" +am__api_version="1.9" # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -1096,44 +1434,51 @@ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:1100: checking for a BSD compatible install" >&5 -echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6 +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_save_IFS=$IFS; IFS=$ac_path_separator - for ac_dir in $PATH; do - IFS=$ac_save_IFS - # Account for people who put trailing slashes in PATH elements. - case $ac_dir/ in - / | ./ | .// | /cC/* \ - | /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* \ - | /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if $as_executable_p "$ac_dir/$ac_prog"; then + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && - grep dspmsg "$ac_dir/$ac_prog" >/dev/null 2>&1; then + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && - grep pwplus "$ac_dir/$ac_prog" >/dev/null 2>&1; then + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 fi fi done - ;; - esac - done + done + ;; +esac +done + fi if test "${ac_cv_path_install+set}" = set; then @@ -1146,7 +1491,7 @@ INSTALL=$ac_install_sh fi fi -echo "$as_me:1149: result: $INSTALL" >&5 +echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. @@ -1157,7 +1502,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -echo "$as_me:1160: checking whether build environment is sane" >&5 +echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 @@ -1181,7 +1526,7 @@ # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - { { echo "$as_me:1184: error: ls -t appears to fail. Make sure there is not a broken + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} @@ -1194,13 +1539,13 @@ # Ok. : else - { { echo "$as_me:1197: error: newly created file is older than distributed files! + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi -echo "$as_me:1203: result: yes" >&5 +echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && program_transform_name="s,^,$program_prefix,;$program_transform_name" @@ -1224,15 +1569,48 @@ am_missing_run="$MISSING --run " else am_missing_run= - { echo "$as_me:1227: WARNING: \`missing' script is too old or missing" >&5 + { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi -for ac_prog in mawk gawk nawk awk +if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi + +for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:1235: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1240,41 +1618,44 @@ if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_AWK="$ac_prog" -echo "$as_me:1250: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - echo "$as_me:1258: result: $AWK" >&5 + echo "$as_me:$LINENO: result: $AWK" >&5 echo "${ECHO_T}$AWK" >&6 else - echo "$as_me:1261: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$AWK" && break done -echo "$as_me:1268: checking whether ${MAKE-make} sets \${MAKE}" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat >conftest.make conftest.make /dev/null | grep temp=` if test -n "$ac_maketemp"; then @@ -1285,48 +1666,71 @@ rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:1288: result: yes" >&5 + echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 SET_MAKE= else - echo "$as_me:1292: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi - # test to see if srcdir already configured +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - { { echo "$as_me:1300: error: source directory already configured; run \"make distclean\" there first" >&5 + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + # Define the identity of the package. PACKAGE=or1ksim VERSION=1.3 -cat >>confdefs.h >confdefs.h >confdefs.h >confdefs.h &5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1346,25 +1750,28 @@ if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_STRIP="${ac_tool_prefix}strip" -echo "$as_me:1356: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - echo "$as_me:1364: result: $STRIP" >&5 + echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6 else - echo "$as_me:1367: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1373,7 +1780,7 @@ ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -echo "$as_me:1376: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1381,15 +1788,18 @@ if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_STRIP="strip" -echo "$as_me:1391: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" @@ -1397,10 +1807,10 @@ fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - echo "$as_me:1400: result: $ac_ct_STRIP" >&5 + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6 else - echo "$as_me:1403: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1414,21 +1824,39 @@ # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. -# Add the stamp file to the list of files AC keeps track of, -# along with our hook. -ac_config_headers="$ac_config_headers config.h" +AMTAR=${AMTAR-"${am_missing_run}tar"} -SIMVERSION=1.2 +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' -case "$target_cpu" in -or32*) CPU_ARCH=or32; - ARCH_ISA=OR32;; -dlx*) CPU_ARCH=dlx; - ARCH_ISA=DLX;; -esac -# We want these before the checks, so the checks can modify their values. + + + + ac_config_headers="$ac_config_headers config.h" + + + +SIMVERSION=1.2 + + + + +test -z "$SIM_ARCH" && SIM_ARCH=or32 + + +case "$SIM_ARCH" in +or32*) CPU_ARCH=or32; + ARCH_ISA=OR32; + ;; +dlx*) CPU_ARCH=dlx; + ARCH_ISA=DLX; + ;; +esac + + +# We want these before the checks, so the checks can modify their values. test -z "$CFLAGS" && CFLAGS="-g -Wall" auto_cflags=1 ac_ext=c @@ -1439,7 +1867,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:1442: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1447,25 +1875,28 @@ if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_CC="${ac_tool_prefix}gcc" -echo "$as_me:1457: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:1465: result: $CC" >&5 + echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else - echo "$as_me:1468: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1474,7 +1905,7 @@ ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:1477: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1482,25 +1913,28 @@ if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_CC="gcc" -echo "$as_me:1492: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:1500: result: $ac_ct_CC" >&5 + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else - echo "$as_me:1503: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1513,7 +1947,7 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:1516: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1521,25 +1955,28 @@ if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_CC="${ac_tool_prefix}cc" -echo "$as_me:1531: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:1539: result: $CC" >&5 + echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else - echo "$as_me:1542: result: no" >&5 + echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi @@ -1548,7 +1985,7 @@ ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:1551: checking for $ac_word" >&5 +echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 @@ -1556,25 +1993,28 @@ if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else - ac_save_IFS=$IFS; IFS=$ac_path_separator -ac_dummy="$PATH" -for ac_dir in $ac_dummy; do - IFS=$ac_save_IFS - test -z "$ac_dir" && ac_dir=. - $as_executable_p "$ac_dir/$ac_word" || continue -ac_cv_prog_ac_ct_CC="cc" -echo "$as_me:1566: found $ac_dir/$ac_word" >&5 -break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:1574: res TRUNCATED