1/1 
|
Don't know how to run. Try
by tyagi007 on Sep 8, 2011 |
tyagi007
Posts: 6 Joined: Jul 29, 2011 Last seen: Feb 3, 2012 |
||
|
Hi,
When i am running my new gdb( after porting to a new target) i am getting the following error: > run Starting program: /home/tyagi/debugger/gdb_dev/gdb-7.3_5_sep/gdb-7.3/gdb-7.3/target_executable .Don't know how to run. Try "help target" Also in some mailing list i found the solution to this problem as "connect to the target where process is running", Could anyone tell me how to connect to the target if i do not have any exertenal (like JTAG) target? regards, Tyagi |
|||
|
RE: Don't know how to run. Try
by jeremybennett on Sep 8, 2011 |
jeremybennett
Posts: 815 Joined: May 29, 2008 Last seen: Jun 13, 2019 |
||
|
Hi,
When i am running my new gdb( after porting to a new target) i am getting the following error: > run Starting program: /home/tyagi/debugger/gdb_dev/gdb-7.3_5_sep/gdb-7.3/gdb-7.3/target_executable .Don't know how to run. Try "help target" Also in some mailing list i found the solution to this problem as "connect to the target where process is running", Could anyone tell me how to connect to the target if i do not have any exertenal (like JTAG) target? regards, Tyagi Hi Tyagi This is the command to run native. Have you ported GDB to run on the machine it is actually debugging. Otherwise you'll need to specify a remote target, for example target sim (to target the simulator) or target remote 192.168.0.37:51000 to target a machine using Remote Serial Protocol over TCP/IP at IP address 192.168.0.27 using port 51000. You'll need to either implement a simulator, or implement a Remote Serial Protocol server (or gdbserver) on your target. HTH Jeremy
-- |
|||
1/1