1/1 
|
Re: [usFrom owner-usb@opencores.org Mon Feb 25 13:10:23 2002
by Unknown on Apr 1, 2004 |
Not available! | ||
|
Hi all,
I have been trying to make the usb1.1 core work in low speed but
without success. It runs fine in full speed @ 48Mhz clock but it doesn't
repond at low speed (I assume its a 6 Mhz clock we have to use!). I get
no response from the PHY and I guess no low speed logic as been
implemented in it.
I know the J & K state are supposed to be inverted for low speed but
after reading up on the USB1.1 Specification, I'm still not clear weather
it is the job of the HUB or the USB DEVICE to invert the logic.
Any help or hints would be greatly appreciated
Somphong
----- Original Message -----
From: "Luis J. Perez" luis.perez@d...>
To: usb@o...
Date: Mon, 25 Feb 2002 10:24:53 +0100
Subject: Re: [usFrom owner-usb@o... Mon Feb 25 13:10:23
2002
Rudolf Usselmann wrote:
>
> On Sunday 24 February 2002 10:51 pm, you wrote:
> Hello all,
> > I intend to downgrade USB 2.0 core of OpenCores to USB 1.1
> which will operate at Low and Full Speed rates. The
reason
> is to enrich cores' variety of OpenCores and to enable
mass
> testing of USB core in OpenCores community.
> > Before I do that, I would like to know about your opinion. The
> most important is from Mr. Rudolf Usselmann, the USB 2.0
core
> creator. Also I knew from the project list that there is
a USB host
> controller project and according to USB archive, it is
also a
> function controller, not a host controller (p.s: I don't
contact
> its maintainer yet...). Thanks...
> > Two suggestions: > > 1) There is no need to downgrade the core, as it will operate > in all three modes (low, full and high) just fine. I think it would
> be a better idea to write a PHY that supports only low and
full
> speed modes instead. That way one could test the complete
> solution at low and full speeds in an FPGA. > > 2) For only low and full speed, it might desirable to create a > different host interface. instead of using shared SSRAM, FIFOs > might be a better solution for many applications. It would be > nice to be able to select between the SSRAM and FIFO > interface. > > As to the "USB Host controller" project, it's bogus. It's a function
> project as well, and the authors seem to have misunderstood
> several important issues from the USB specification ... I have > emailed the authors but never got a reply, I have also asked > Damjan to remove the project, but that has not happened yet ...
>
> Cheers, > rudi >
> Best regard,
> > > RE Tambunan > I did a quick design for the first solution proposed by Rudi (a PHY that supports low-full speed) . That was 2 or 3 months ago, and no longer working on it. I'm not very proud of it, and I feel it could be better. If you are really interested, please contact me... ====================================================== ==
Luis Jose Perez Lafuente luis.perez@d...
Design Engineer
Digital Design Department
Design of Systems on Silicon http://www.ds2.es
Av. Charles Robert Darwin, 2 Phone. +34-96-136 60 04
Parc Tecnologic Ext. 152
46980 Paterna (VALENCIA) FAX +34-96-136 62 50
SPAIN
====================================================== == |
|||
1/1