1/1
Cypress EZ-Host/peripheral CY7C67300
by shahh on Jul 16, 2008 |
shahh
Posts: 3 Joined: Jun 24, 2008 Last seen: Dec 15, 2008 |
||
Hi, I have cypress EZ-Host Cy7C67300 chip and the CY3663 development kit. I am looking to use CY7C67300 in coprocessor mode to talk with an external master and in device mode. I have seen many articles on CY7C67300 as host and in co-processor mode but none as device/peripheral and in co-processor mode. I know it is good to use a peripheral controller but this is just as a start later on i am planning to use it in hybrid mode. any help is appreciated Thanks in advance |
Cypress EZ-Host/peripheral CY7C67300
by shahh on Jul 17, 2008 |
shahh
Posts: 3 Joined: Jun 24, 2008 Last seen: Dec 15, 2008 |
||
Hello,
I am designing a peripheral using CY7C67300 EZ-Host/Peripheral controller. I am using CY7C67300 in co-processor mode with an external CPLD as master. CY7C6300 is going to be device/peripheral. I have seen many articles of Cy7C67300 as host and in co-processor mode, but didnt find anything as peripheral and in co-processor mode. Has anyone tried this or can suggest where can i find the modifications/ infromation required ? I knowthere are mant peripheral controllers available but i am plannign on using it as peripheral now and then later on when i get it working as peripheral use it host features. Thanks in advance |
Cypress EZ-Host/peripheral CY7C67300
by Unknown on Jul 18, 2008 |
Not available! | ||
it is my pleasure to receive your mail, now i am practise USB functions in ISP1362 with DE2 Board.
Maybe you can find some reference from the ISP1362 embeded programming handbook.
Best wishes to you
在2008-07-17,shahh at zin-tech.com 写é“:
Hi,
I have cypress EZ-Host Cy7C67300 chip and the CY3663 development
kit. I am looking to use CY7C67300 in coprocessor mode to talk with an
external master and in device mode.
I have seen many articles on CY7C67300 as host and in co-processor
mode but none as device/peripheral and in co-processor mode.
I know it is good to use a peripheral controller but this is just as a start
later on i am planning to use it in hybrid mode.
any help is appreciated
Thanks in advance
_______________________________________________
http://www.opencores.org/mailman/listinfo/usb
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.opencores.org/forums.cgi/usb/attachments/20080718/f7a6d342/attachment.html
|
Cypress EZ-Host/peripheral CY7C67300
by Unknown on Jul 19, 2008 |
Not available! | ||
you can refer to ISP1362 to find how a USB Controller takes as a device.
there are ISP1362's embedded programming handbook in the net.
i am using ISP1362,and i think it is somehow similar to CY7* in designing USB device controller!
在2008-07-17,shahh at zin-tech.com 写é“:
Hello,
I am designing a peripheral using CY7C67300 EZ-Host/Peripheral
controller. I am using CY7C67300 in co-processor mode with an external
CPLD as master. CY7C6300 is going to be device/peripheral.
I have seen many articles of Cy7C67300 as host and in co-processor
mode, but didnt find anything as peripheral and in co-processor mode.
Has anyone tried this or can suggest where can i find the modifications/
infromation required ?
I knowthere are mant peripheral controllers available but i am plannign
on using it as peripheral now and then later on when i get it working as
peripheral use it host features.
Thanks in advance
_______________________________________________
http://www.opencores.org/mailman/listinfo/usb
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.opencores.org/forums.cgi/usb/attachments/20080719/27ef7212/attachment-0001.htm
|
Cypress EZ-Host/peripheral CY7C67300
by Unknown on Jul 20, 2008 |
Not available! | ||
hi,
I need see data sheet ,please send details
On 7/18/08, 王å®é¾™ missile-base at 163.com> wrote:
it is my pleasure to receive your mail, now i am practise USB functions in
ISP1362 with DE2 Board.
Maybe you can find some reference from the ISP1362 embeded programming
handbook.
Best wishes to you
在2008-07-17,shahh at zin-tech.com 写é“:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.opencores.org/forums.cgi/usb/attachments/20080720/3338735e/attachment.html
>
>Hi,
>
>I have cypress EZ-Host Cy7C67300 chip and the CY3663 development
>kit. I am looking to use CY7C67300 in coprocessor mode to talk with an
>external master and in device mode.
>I have seen many articles on CY7C67300 as host and in co-processor
>mode but none as device/peripheral and in co-processor mode.
>
>I know it is good to use a peripheral controller but this is just as a start
>later on i am planning to use it in hybrid mode.
>
>any help is appreciated
>
>Thanks in advance
>
>_______________________________________________
>http://www.opencores.org/mailman/listinfo/usb
------------------------------
22元超值é¥é¢,8.5折纯ç比è¨,必胜宅急é€ç½‘上点é¤ä¼˜æƒ 多http://popme.163.com/link/004584_0708_6957.html>
_______________________________________________
http://www.opencores.org/mailman/listinfo/usb
|
Cypress EZ-Host/peripheral CY7C67300
by Unknown on Jul 22, 2008 |
Not available! | ||
Skipped content of type multipart/alternative-------------- next part --------------
A non-text attachment was scrubbed...
Name: ISP1362_5.pdf
Type: application/pdf
Size: 693737 bytes
Desc: not available
Url : http://www.opencores.org/forums.cgi/usb/attachments/20080722/dd98c316/ISP1362_5-0001.pdf
|
Cypress EZ-Host/peripheral CY7C67300
by shahh on Jul 24, 2008 |
shahh
Posts: 3 Joined: Jun 24, 2008 Last seen: Dec 15, 2008 |
||
I know that CY7C67300 can be used as device and in co-processor
mode.
I am using the EZ-Host board from the cypress CY3663 development kit.
Has anyone tried using the EZ-Host as device and in co-processor mode
with external master?
----- Original Message -----
From: Ãõ±¦Ãúmissile-base at 1...>
To:
Date: Tue Jul 22 17:43:40 CEST 2008
Subject: [usb] Cypress EZ-Host/peripheral CY7C67300
Skipped content of type multipart/alternative-------------- next
part -------------- A non-text attachment was scrubbed... Name: ISP1362_5.pdf Type: application/pdf Size: 693737 bytes Desc: not available Url : ISP1362_5-0001.pdf |
Cypress EZ-Host/peripheral CY7C67300
by Unknown on Aug 7, 2008 |
Not available! | ||
Respectec Professionals,
I am an ElectronicsEngineer .I want to do some freelance work in
Circuit/logic design/chip design /control design side.
I would be happy if you assign me some work on this side or let me know some
resources.
I am from Pakistan and my resume link is available on bootom of email.
Thanks
On 7/20/08, vijayan g vijayan.vlsi at gmail.com> wrote:
hi,
I need see data sheet ,please send details
On 7/18/08, 王å®é¾™ missile-base at 163.com> wrote:
--
Muhammad Asim Shehzad
www.visualcv.com/muhammadasimshehzad/muhammad-asim-shehzad
Call me free
http://www.jaxtr.com/asim_569
PRIVACY NOTICE:
This Email is covered by the Electronic Communications Privacy Act, 18
U.S.C. SS 2510-2521 and is legally privileged. The information contained in
this Email is intended only for use of the individual or entity named above.
If the reader of this message is not the intended recipient, or the employee
or agent responsible to deliver it to the intended recipient, you are hereby
notified that any dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this
communication in error, please immediately notify us by telephone / fax / or
email at the above coordinates and destroy the original message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.opencores.org/forums.cgi/usb/attachments/20080807/79a5d79f/attachment.htm
it is my pleasure to receive your mail, now i am practise USB functions in
ISP1362 with DE2 Board.
Maybe you can find some reference from the ISP1362 embeded programming
handbook.
Best wishes to you
在2008-07-17,shahh at zin-tech.com 写é“:
_______________________________________________
http://www.opencores.org/mailman/listinfo/usb
>
>Hi,
>
>I have cypress EZ-Host Cy7C67300 chip and the CY3663 development
>kit. I am looking to use CY7C67300 in coprocessor mode to talk with an
>external master and in device mode.
>I have seen many articles on CY7C67300 as host and in co-processor
>mode but none as device/peripheral and in co-processor mode.
>
>I know it is good to use a peripheral controller but this is just as a start
>later on i am planning to use it in hybrid mode.
>
>any help is appreciated
>
>Thanks in advance
>
>_______________________________________________
>http://www.opencores.org/mailman/listinfo/usb
------------------------------
22元超值é¥é¢,8.5折纯ç比è¨,必胜宅急é€ç½‘上点é¤ä¼˜æƒ 多http://popme.163.com/link/004584_0708_6957.html>
_______________________________________________
http://www.opencores.org/mailman/listinfo/usb
|
1/1