OpenCores
Issue List
uart_rx have some receive err bit #4
Closed andylgh opened this issue about 10 years ago
andylgh commented about 10 years ago

uart_rx have some receive err bit when i set baud rate 115200bps,and clk run 100Mhz.i test it in binary mode

motilito commented about 10 years ago

Can you please elaborate? Did you try changing the number of stop bits of the UART to 1.5 or 2? Moti

motilito commented about 10 years ago

UART was verified on an FPGA board with baud rate of 115200 and clock frequency of 48MHz. A problem was found when operated at high data rate and 1 stop bit. Transmit and receive module where corrected.

motilito closed this about 10 years ago

Assignee
No one
Labels
Bug