Rev |
Log message |
Author |
Age |
Path |
186 |
Fixed Hardware Multiplier byte operations bug: http://opencores.org/bug,assign,2247 |
olivier.girard |
4099d 05h |
/openmsp430/trunk/core/rtl |
180 |
Add new ASIC_CLOCKING configuration option to allow ASIC implementations with FPGA clocking scheme.
Thanks to Sebastien Van Cauwenberghe's contribution :-) |
olivier.girard |
4141d 04h |
/openmsp430/trunk/core/rtl |
175 |
Update hardware breakpoint unit with the followings:
- fixed hardware breakpoint bug with CALL instructions.
- modified data read watchpoint behavior to also trigger with read/modify/write instructions.
- removed unused ports. |
olivier.girard |
4167d 04h |
/openmsp430/trunk/core/rtl |
174 |
Cleanup dmem_wr generation logic. Important note: this is not a bug fix, only beautification. |
olivier.girard |
4167d 04h |
/openmsp430/trunk/core/rtl |
154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4274d 05h |
/openmsp430/trunk/core/rtl |
151 |
Add possibility to configure custom Program, Data and Peripheral memory sizes. |
olivier.girard |
4359d 03h |
/openmsp430/trunk/core/rtl |
149 |
Update simulation regression result parser.
Fixed failing SFR test (due to newer MSPGCC version).
Implement request http://opencores.org/bug,view,2171 (burst accesses through the serial debug interface) |
olivier.girard |
4362d 05h |
/openmsp430/trunk/core/rtl |
134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4481d 05h |
/openmsp430/trunk/core/rtl |
132 |
Update FPGA examples with the POP.B bug fix |
olivier.girard |
4494d 05h |
/openmsp430/trunk/core/rtl |
130 |
Fixed POP.B bug (see Bugtracker http://opencores.org/bug,assign,2137 ) |
olivier.girard |
4502d 04h |
/openmsp430/trunk/core/rtl |
128 |
Fixed CALL x(SR) bug (see Bugtracker http://opencores.org/bug,view,2111 ) |
olivier.girard |
4578d 04h |
/openmsp430/trunk/core/rtl |
117 |
To facilitate commercial adoption of the openMSP430, the core has moved to a modified BSD license. |
olivier.girard |
4754d 06h |
/openmsp430/trunk/core/rtl |
112 |
Modified comment. |
olivier.girard |
4787d 05h |
/openmsp430/trunk/core/rtl |
111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4788d 05h |
/openmsp430/trunk/core/rtl |
106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4844d 03h |
/openmsp430/trunk/core/rtl |
105 |
Removed dummy memory read access for the MOV/PUSH/CALL/RETI instructions.
These were not problematic but this is simply cleaner that way. |
olivier.girard |
4859d 04h |
/openmsp430/trunk/core/rtl |
103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4864d 11h |
/openmsp430/trunk/core/rtl |
102 |
Fixed bug reported by Mihai ( http://opencores.org/bug,view,1955 ).
The following PUSH instructions are now working as expected:
- indexed mode: PUSH x(R1)
- indirect register mode: PUSH @R1
- indirect autoincrement: PUSH @R1+ |
olivier.girard |
4865d 03h |
/openmsp430/trunk/core/rtl |
101 |
Cosmetic change in order to prevent an X propagation whenever executing a byte instruction with an uninitialized memory location as source. |
olivier.girard |
4865d 05h |
/openmsp430/trunk/core/rtl |
91 |
Fixed bug when an IRQ arrives while CPU is halted through the serial debug interface.
This bug is CRITICAL for people using working with interrupts and the Serial Debug Interface. |
olivier.girard |
4877d 06h |
/openmsp430/trunk/core/rtl |
86 |
Update serial debug interface test patterns to make them work with all program memory configurations. |
olivier.girard |
4900d 03h |
/openmsp430/trunk/core/rtl |
85 |
Diverse RTL cosmetic updates. |
olivier.girard |
4900d 04h |
/openmsp430/trunk/core/rtl |
84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4905d 05h |
/openmsp430/trunk/core/rtl |
79 |
Update the GPIO peripheral to fix a potential synchronization issue. |
olivier.girard |
4966d 06h |
/openmsp430/trunk/core/rtl |
74 |
Update serial debug interface to support memories with a size which is not a power of 2.
Update the software tools accordingly. |
olivier.girard |
5053d 06h |
/openmsp430/trunk/core/rtl |
72 |
Expand configurability options of the program and data memory sizes. |
olivier.girard |
5080d 07h |
/openmsp430/trunk/core/rtl |
67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5227d 13h |
/openmsp430/trunk/core/rtl |
66 |
The peripheral templates are now under BSD license.
Developers of new peripherals based on these templates won't have to disclose their code. |
olivier.girard |
5227d 17h |
/openmsp430/trunk/core/rtl |
60 |
Cleanup of the PC (R0) generation logic.
Formal equivalence was shown between the new and old code with Synopsys' Formality (to make sure that nothing has been broken :-P ). |
olivier.girard |
5259d 04h |
/openmsp430/trunk/core/rtl |
57 |
Update design to exclude the range mode from the debug hardware breakpoint units. As this feature is not used by GDB, it has been disabled in order to improve the timings and save a bit of area/utilisation.
Note that if required, this feature can be re-enabled through the `HWBRK_RANGE define located in the "openMSP430_defines.v" file. |
olivier.girard |
5261d 02h |
/openmsp430/trunk/core/rtl |