| Rev |
Log message |
Author |
Age |
Path |
| 205 |
Thanks again to Johan W. good feedback, the following updates are implemented:
- Change code to fix delta cycle issues on some simulators in mixed VHDL/Verilog environment.
- Update oscillators enable generation to relax a critical timing paths in the ASIC version.
- Add option to scan fix inverted clocks in the ASIC version (disabled by default as this is supported by most tools). |
olivier.girard |
3240d 12h |
/openmsp430/trunk/core/rtl/ |
| 204 |
Fix DMA interface RTL merge problem (defines got wrong values). Fix CDC issue with the timerA (thanks to Johan for catching that). |
olivier.girard |
3247d 13h |
/openmsp430/trunk/core/rtl/ |
| 202 |
Add DMA interface support + LINT cleanup |
olivier.girard |
3254d 12h |
/openmsp430/trunk/core/rtl/ |
| 200 |
Major verificaiton and benchmark update to support both MSPGCC and RedHat/TI GCC toolchains. |
olivier.girard |
3415d 11h |
/openmsp430/trunk/core/rtl/ |
| 192 |
Number of supported IRQs is now configurable to 14 (default), 30 or 62. |
olivier.girard |
3815d 13h |
/openmsp430/trunk/core/rtl/ |
| 190 |
Remove dummy memory read access for CMP and BIT instructions. |
olivier.girard |
3955d 13h |
/openmsp430/trunk/core/rtl/ |
| 188 |
Add missing include commands for the define and undefine files in the wakeup_cell and in dbg_i2c. |
olivier.girard |
3967d 13h |
/openmsp430/trunk/core/rtl/ |
| 186 |
Fixed Hardware Multiplier byte operations bug: http://opencores.org/bug,assign,2247 |
olivier.girard |
4068d 13h |
/openmsp430/trunk/core/rtl/ |
| 180 |
Add new ASIC_CLOCKING configuration option to allow ASIC implementations with FPGA clocking scheme.
Thanks to Sebastien Van Cauwenberghe's contribution :-) |
olivier.girard |
4110d 12h |
/openmsp430/trunk/core/rtl/ |
| 175 |
Update hardware breakpoint unit with the followings:
- fixed hardware breakpoint bug with CALL instructions.
- modified data read watchpoint behavior to also trigger with read/modify/write instructions.
- removed unused ports. |
olivier.girard |
4136d 12h |
/openmsp430/trunk/core/rtl/ |
| 174 |
Cleanup dmem_wr generation logic. Important note: this is not a bug fix, only beautification. |
olivier.girard |
4136d 12h |
/openmsp430/trunk/core/rtl/ |
| 154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4243d 13h |
/openmsp430/trunk/core/rtl/ |
| 151 |
Add possibility to configure custom Program, Data and Peripheral memory sizes. |
olivier.girard |
4328d 11h |
/openmsp430/trunk/core/rtl/ |
| 149 |
Update simulation regression result parser.
Fixed failing SFR test (due to newer MSPGCC version).
Implement request http://opencores.org/bug,view,2171 (burst accesses through the serial debug interface) |
olivier.girard |
4331d 13h |
/openmsp430/trunk/core/rtl/ |
| 134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4450d 13h |
/openmsp430/trunk/core/rtl/ |
| 132 |
Update FPGA examples with the POP.B bug fix |
olivier.girard |
4463d 13h |
/openmsp430/trunk/core/rtl/ |
| 130 |
Fixed POP.B bug (see Bugtracker http://opencores.org/bug,assign,2137 ) |
olivier.girard |
4471d 12h |
/openmsp430/trunk/core/rtl/ |
| 128 |
Fixed CALL x(SR) bug (see Bugtracker http://opencores.org/bug,view,2111 ) |
olivier.girard |
4547d 12h |
/openmsp430/trunk/core/rtl/ |
| 117 |
To facilitate commercial adoption of the openMSP430, the core has moved to a modified BSD license. |
olivier.girard |
4723d 14h |
/openmsp430/trunk/core/rtl/ |
| 112 |
Modified comment. |
olivier.girard |
4756d 13h |
/openmsp430/trunk/core/rtl/ |
| 111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4757d 13h |
/openmsp430/trunk/core/rtl/ |
| 106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4813d 11h |
/openmsp430/trunk/core/rtl/ |
| 105 |
Removed dummy memory read access for the MOV/PUSH/CALL/RETI instructions.
These were not problematic but this is simply cleaner that way. |
olivier.girard |
4828d 12h |
/openmsp430/trunk/core/rtl/ |
| 103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4833d 19h |
/openmsp430/trunk/core/rtl/ |
| 102 |
Fixed bug reported by Mihai ( http://opencores.org/bug,view,1955 ).
The following PUSH instructions are now working as expected:
- indexed mode: PUSH x(R1)
- indirect register mode: PUSH @R1
- indirect autoincrement: PUSH @R1+ |
olivier.girard |
4834d 11h |
/openmsp430/trunk/core/rtl/ |
| 101 |
Cosmetic change in order to prevent an X propagation whenever executing a byte instruction with an uninitialized memory location as source. |
olivier.girard |
4834d 13h |
/openmsp430/trunk/core/rtl/ |
| 91 |
Fixed bug when an IRQ arrives while CPU is halted through the serial debug interface.
This bug is CRITICAL for people using working with interrupts and the Serial Debug Interface. |
olivier.girard |
4846d 14h |
/openmsp430/trunk/core/rtl/ |
| 86 |
Update serial debug interface test patterns to make them work with all program memory configurations. |
olivier.girard |
4869d 11h |
/openmsp430/trunk/core/rtl/ |
| 85 |
Diverse RTL cosmetic updates. |
olivier.girard |
4869d 12h |
/openmsp430/trunk/core/rtl/ |
| 84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4874d 13h |
/openmsp430/trunk/core/rtl/ |
