Project maintainers


Name: opb_usblite
Created: Jun 2, 2010
Updated: Jun 8, 2010
SVN Updated: Jun 9, 2010
SVN: Browse
Latest version: download (might take a bit to start...)
Statistics: View
Bugs: 0 reported / 0 solved
Star1you like it: star it!

Other project properties

Category:Communication controller
Development status:Alpha
Additional info:FPGA proven
WishBone compliant: No
WishBone version: n/a
License: LGPL


opb_usblite - opb_uartlite replacement for Xilinx Microblaze processor written in VHDL and Verilog. The opb_usblite is compatible with the USB CDC profile and works with microsoft usbser virtual comport driver (VCD).


The opb_usblite connects directly to the OPB bus. For users that are using the processor local bus (PLB) it is possible to add a PLB2OPB bridge. See the reference design for the Spartan 3E starter board.

There are a few generics to configure the behavior of the core.

    C_SYSRST  :       std_logic := '1';  -- enable external reset
    C_PHYMODE :       std_logic := '1';  -- phy mode
    C_VENDORID :      std_logic_vector(15 downto 0) := X"1234"; -- VID
    C_PRODUCTID :     std_logic_vector(15 downto 0) := X"5678"; -- PID
    C_VERSIONBCD :    std_logic_vector(15 downto 0) := X"0200"; -- device version
    C_SELFPOWERED :   boolean := false; -- self or bus powered
    C_RXBUFSIZE_BITS: integer range 7 to 12 := 10; -- size of rx buf (2^10 = 1024 bytes)
    C_TXBUFSIZE_BITS: integer range 7 to 12 := 10  -- size of tx buf (2^10 = 1024 bytes)
There are six I/O signals for connecting the core to an usb transceiver, e.g USB1T11A from Fairchild Semiconductor. A schematic drawing in pdf format can be found here.
    txdp : out std_logic; -- connect to VPO
    txdn : out std_logic; -- connect to VMO/FSEO
    txoe : out std_logic; -- connect to OE
    rxd : in std_logic;   -- connect to RCV
    rxdp : in std_logic;  -- connect to VP
    rxdn : in std_logic   -- connect to VM

The core consumes around 527 slices in a Spartan 3s500. In addition it also needs a 48MHz clock, easily generated by a DCM or clock generator core. It does not need to be synchronized with the processor clock. All signals crossing the clock domains are handled in the opb_usblite core. An example of a clock generator is found in the reference design.

Device utilization summary:

Selected Device : 3s500efg320-4 

 Number of Slices:                      527  out of   4656    11%  
 Number of Slice Flip Flops:            396  out of   9312     4%  
 Number of 4 input LUTs:                962  out of   9312    10%  
    Number used as logic:               961
    Number used as Shift registers:       1
 Number of IOs:                         118
 Number of bonded IOBs:                   0  out of    232     0%  
 Number of BRAMs:                         3  out of     20    15%  


There is a basic driver for microblaze designs included in the project. It is compatible with the drivers supplied for opb_uartlite in most aspects. In software settings in EDK just select opb_usblite as stdio. Although microsoft windows is shipped with drivers for usb cdc devices it is necessary to supply an inf file with usb VID and PID information. Just point to the project supplied .inf file when the pnp manager is asking for a driver. Note that the usual bit rate, handshake etc. settings are not used and have no affect to the communication with the target.

  RX FIFO      base + $0
  TX FIFO      base + $4
  CONTROL REG  base + $8
  STATUS REG   base + $C

  -- Write Only
  -- bit 0   Reset_TX_FIFO -- not used
  -- bit 1   Reset_RX_FIFO -- not used
  -- bit 2   Dont'Care
  -- bit 3   Dont'Care
  -- bit 4   enable_rxinterrupts
  -- bit 5   Dont'Care
  -- bit 6   enable_txinterrupts
  -- bit 7   tx_enable -- not used

  -- Read Only
  -- bit 0 rx_Data_Present
  -- bit 1 rx_Buffer_Full
  -- bit 2 tx_Buffer_Empty
  -- bit 3 tx_Buffer_Full
  -- bit 4 interrupt flag
  -- bit 5 not used always '0'
  -- bit 6 online flag
  -- bit 7 suspend flag  


    opb_usblite is using components by Rudolf Usselmann see
    and Joris van Rantwijk see